Orlit ROVELIGHT RT601, Руководство пользователя

Страница: 6 / 24

6
For Your Safety
Always keep this product dry. Do not use in rain or in damp conditions.
Please dry your hands before handling the equipment, as wet hand are dan-
gerous to both the equipment and to you.
This product contains high-voltage electronic parts. Touching the high-volt-
age circuit inside it may result in electric shock. Do not disassemble. Should
repairs become necessary, this product must be sent to an authorized
maintenance center.
Stop using this product if it breaks open due to internal shifting, falling or
strong impact. STRONG electric shock may occur if you touch the compo-
nents inside.
Do not use the strobe unit in the presence of flammable gases, chemicals
and other similar materials. In certain circumstances, these materials may
be sensitive to the strong light emitting from this strobe unit and fire may
result.
Do not leave or store the strobe unit if the ambient temperature reads over
122 ° F/50°C (e.g. in automobile in the sun). Otherwise the electronic parts
may be damaged.
Do not use any power supply other than the included one to charge the
battery. Please do not use the flash while the battery is connected to the
charger.
Do not insert metal parts into any lighting equipment, except the special
umbrella channel. Please ensure that you have firmly tightened the handle
on the umbrella bracket before using it to support the unit
Do not touch the electrical contacts on the strobe or battery or contact
them with any conductive materials.
This strobe has an over-heat protection circuit. Rapid continuous firing will
cause the strobe to slow operation and trigger a “cool down” period. After
this period, the strobe will resume normal operation. You may also reboot
the strobe by cycling the power off and then on.