8
UM0972191 A 02
7.8. Boundary settings
See figure 24
Boundary on/off;
Turn boundary around video channel on or off.
Boundary color;
Adjust the color of the boundary. Adjustable options:
GRN:
Green
BLU:
Blue
MAG:
Magenta
BLA:
Black
RED:
Red
WHI:
White
YEL:
Yellow
CYA:
Cyaan
Boundary blink;
Choose wether the boundary should blink or not.
Boundary blink color;
Adjust the color of the boundary blink. Adjustable
options:
GRN:
Green
BLU:
Blue
MAG:
Magenta
BLA
: Black
RED:
Red
WHI:
White
YEL:
Yellow
CYA:
Cyaan
8. Info
See figure 25. This option shows Orlaco Multiview box II
information. Check in this screen your software version
which is described in this manual.
User manual
Sequencer power up
; Select wether the sequencer
starts in auto or manual mode after power-up.
Manual mode is only function in other (special)
products from Orlaco and can not be selected in this
confi guration.
7.6. Comm. settings
See figure 22
These settings are for internal Orlaco use only and
have no function with the orlaco Serial monitor.
Please do not change the settings.
7.7. OSD settings
See figure 23
Menu horizontal pos
Adjust the horizontal position of the menu. 1 is left up
and 16 is right up.
Menu vertical pos
Adjust the vertical position of the menu. 1 is top of
screen and 8 is bottom.
Figure 24
Figure 25
Figure 22
Figure 23
Figure 21
5
5
UM0972191 A 02
Marker mix
Adjust the transparancy of the marker.
(adjustable options: 0-, 25-, 50- or 100%)
Ver. marker1
Enable this option to switch the marker on. The marker
is displayed as a vertical green (color adjustable) line.
The marker options are the same as the Hor. marker1.
Ver. marker2
Enable this option to switch a second vertical marker
on. The marker is displayed as a green (color adjusta-
ble) line.
The marker options are the same as the Hor. marker2.
Brightness
Adjust the brightness of the image
(adjustable between 0-100)
Contrast
Adjust the contrast of the image.
(adjustable between 0-100)
Saturation
Adjust the saturation (color intensity) of the image.
(adjustable between 0-100)
5. Startup mode
Choose the default output video mode (PAL, NTSC)
when no camera is attached. See figure 8
.
6. Camera tags
This section describes how to define the camera text-
labels, see figure 9.
In this menu the text-labels for the camera inputs can
be defined.
The number of the tags is depending on the camera
switch option. (For more info please refer to the Orlaco
Monitor User Manual.)
Select a camera and the option opens the camera tag
editor menu. You can define each camera a name. (max.
6 characters), see figure 10
User manual
Figure 9
Figure 10
Figure 7
Figure 8