4
OPERATION INSTRUCTION
1. Before inserting the plug into an electrical outlet, make sure that the
electrical supply in your area matches that on the rating label on the unit.
2. Carefully remove the heater from the plastic bag and the carton.
3. Place the heater on a firm, flat, level surface, setting the master button to
“-”position, plug the cord set into a AC220-240V~ electrical outlet. There
will be a “BEEP” sound and the “Powerlight is on and the heater display will
show the default temperature, it will blink for 5 seconds.
1) HEATING PERPARE
Set time
Before turn on the heater,set the time as right time.Press remote control “ ”
button, light on control panel,LED display shows 00:00 and “Mo”light on.
HOUR
Press “Set” button one time,LED display front “00” flashes, press “
two buttons set the Hours from 01--00(01=1 o’clock,02=2 o’clock...00=24
o’clock ect.)
MINUTE
Press “Set” button again,LED display behind “00” flashes, press “
two buttons set the minutes from 00--59(01=1 Minute,02=2 Minute ect.)
WEEK
Press “Set” button again,“Mo”light flashes ,press “
two buttons set
the week from Mo--Su (Mo=Monday...Su=Sunday ect.)
PS:
Press “Set” button, screen shows number will flashes 5 seconds, you should
operate in time, otherwise appliance will get back to standby.
(Appliance will keep the right time until power off)
2) General Using OPERATION
1. Turn the heater ON by pressing the ON/OFF main button ,the unit will
blow the cold air and “ ” light is on.
2. Pressing the “MODE” button ,the unit will blow the warm air and both“ ”
and “
” lights are on.
3. Pressing the “MODE” button second times,the unit will blow the hot air and
both “”“” lights are on.
4. Pressing the “MODE” button Three times,the unit will blow the cold air and
“Fan/M” light is on.
PS:
On control panel “ ” button, press 1st time is COOL AIR; 2nd times is
WARM AIR; 3rd times is HOT AIR; 4th timers is SWING FUNCTION; 5th times
is OFF,pls noted it.