PROFESSIONAL
SuRvEILLANcE SYSTEM
4
vIDEO DOOR PHONE
18cm LcD mONITOR
Sc122
4 SyStEm cOnnEctIOn
5 InStaLLatIOn Of mOnItOr
Depend on
user’s height
Positioning
›
beFore INstAllAtIoN check the uNIt FuNctIoNAlIty
1. Select a suitable installation point
2. Install the bracket
a: Drill holes in the wall and insert plugs.
b: Tighten the screws.
3. Run the extension cable through the bracket hole and connect the
wires to video monitor according to wiring diagram.
4. Connect the power supply to the video monitor.
5. Insert the bracket to the slots on the rear panel of video monitor.
White (Audio)
Red (VDD)
Black (GND)
Yellow (Video)
1
2
3
4
5
1. Connect the 15 metre connection cable as
supplied, to the back of the monitor and
camera unit.
2. Connect the power supply to the back of
the monitor and plug into 240V AC 50Hz
power point.
Note:
During pre-installation check feedback
interference noise that might be generated due
to the close proximity of the monitor and the
camera, this phenomenon is normal.
Yellow (V
ideo)
Black (GND)
Red (VDD)
White (Audio)
Cable colour wiring
diagram based on cables
supplied with this unit.
Power supply to video monitor
Video monitor to outdoor camera
3. Once you assured that the system operates
correctly, plan the monitor and camera
installation points within 15 metres.
Lay the extension cable out between the
desired locations for the outdoor camera and
video monitor. If you are not comfortable
doing this you may need the services of an
electrician or licenced cabler.