wIreless
surveIllance sYstem
9
When SD card is full, recording will automatically
stop, or over write function can be enable to
over write:
MENU>RECORD SETUP>SD OVER WRITE>YES
›
RECoRDINg lIVE:
Set DVR display mode to SINGLE or QUAD, by
pressing “>||” button on the DVR control panel
or remote control, DVR cannot record AUTO
display mode.
Press “REC” button on the DVR control
panel or remote control to record, press “REC”
button again to stop recording.
›
SChEDUlED RECoRDINg MoDE:
MENU>RECORD SETUP>SCHEDULE
RECORDING
Set start time and end time, and select ON
by pressing “>||” when finish.
›
MotIoN DEtECtIoN RECoRDINg MoDE:
1. to enable motion detection
MENU>RECORD SETUP>MOTION DETECT
ACTIVITY>ON
2. then setup motion detection sensitivity
MENU>RECORD SETUP>MOTION
SENSITIVITY>LOW/MEDIUM/HIGH
3. finally setup motion record time duration
if motion detected
MENU>RECORD SETUP>MOTION RECORD
TIME>15SEC/30SEC/1MIN
›
SECtIoN 3: PlAyBACk MoDE
to play back recorded video:
MENU>PLAY BACk>VIDEO>SELECT
DATE>SELECT TIME
PRESS “<” BUTTON ON THE DVR
CONTROL PANEL OR REMOTE CONTROL TO
RETURN TO PREVIOUS PAGE
PRESS “MENU” BUTTON ON THE DVR
CONTROL PANEL OR REMOTE CONTROL TO
RETURN TO MENU PAGE
Inside recorded video storage Use “^ or v”
button on the DVR control panel or remote
control to navigate, press “>||” button on the
DVR control panel or remote control to entre,
play or pause video.
While the video is playing, press “< or >” to
fast-forward and rewind the video.
to delete file:
Use “>” button on the DVR control panel
or remote control, or use “DEL” button on
remote control to delete selected file. After
pressing “>” button, the system will ask “ARE
YOU SURE, select “YES or NO” then press
“>||” button to confirm.
›
SECtIoN 4: CAMERA PAIRINg
The cameras come with the kit have already
paired to the DVR.
Camera pairing function is necessary for
connecting additional cameras. Additional
cameras are assigned to a different channel on
the wireless channel; up to 4 cameras can be
connected.
* nOte: please pair the camera before
permanent installation/mounting.
to pair a camera:
Ensure all cameras and DVR is powered.
Ensure all wireless channels are enabled for
adding additional camera.
MENU>Camera setup>Activation>CAM1/
CAM2/CAM3/CAM4>ON.
MENU>CAMERA SETUP>PAIRING>1/2/3/4>
press pairing button on the camera within
10 seconds.
›
SECtIoN 5: AV oUtPUt
To display image on external screen press
“AV” button on the front control panel, press
“AV” button again to return to DVR display
In AV mode, DVR display screen will
automatically turn off.
Use supplied AV cable to connect to external
display screen
Please check external display screen format,
PAL/NTSC, SC242 DVR supports dual output
format.
PAL and NTSC, to change AV output format:
MENU> SYSTEM SETUP >TV OUT>PAL/NTSC
›
SECtIoN 6: SD CARD
SD card required to format for first time use.
The DVR support SD card up to 32 GB
maximum, include SDHC type SD card.
MENU> SYSTEM SETUP> SD FORMAT> YES
›
SECtIoN 7: fIRMWARE UPgRADE
Firmware upgrade is only for factory and
authorizes repairer use only, do not upgrade
the firmware.
11 operation
18cm lcd
dIgItal vIdeo recorder
wIth two day/nIght cameras
sc242
CAMERA PAIRINg
BUTTON
