User's Manual PNVR200 series
37
4.
When the "ADD VIEW TYPE" dialog appears, click <
ADD VIEW TYPE >.
5.
When the "SEQUENCE SETUP" dialog appears, select
a split mode that you want to add from <VIEW
TYPE>.
6.
If the selected split mode is displayed on "VIEW
CONFIGURE", select a channel you want to display in
each split screen.
7.
Click <CONFIRM>.
The set sequence mode is confirmed and will be
added to the Add Sequence list in order
8.
When done, click <CLOSE> in the bottom of the
screen. After the sequence type is saved, you will
return to the previous screen.
9.
Right-click on the new sequence, or press the
[ENTER] button on the remote control to edit or
delete it.
8CH NVR model support only 1-, 4-, 9-, 6- and 8-split
screen modes
To edit a sequence
4.3.5.
1.
Click the <EDIT> button on the right side of listed
Sequence to be edited.
2.
The "EDIT" dialog appears.
3.
Use the [
▲▼◀▶
]buttons on the remote control or
use the mouse to edit the selected sequence
> SEQUENCE TITLE : enter a new sequence name.
> ACTIVATION : specify the use of the sequence.
> MODIFY : change the settings of the sequence
mode.
> DELETE : delete the selected sequence list.
> CANCEL : cancel the changes.
4.
Pressing the <MODIFY> button will display the Edit
Sequence window.
5.
To change the existing settings, select a screen mode
that you want to edit and right-click to display the
context menu. Then, select < MODIFY >.
6.
When done, click <CLOSE> to close the window.
7.
To apply your changes, click <APPLY>.
4.4.
Audio Setup
You can configure audio and signal beeps.
Audio
4.4.1.
You can select the default audio channel and configure network audio transmission
