10
Troubleshooting
Do not disassemble or attempt to repair the machine yourself
Conditions
Possible Cause and Solution
z
The machine stops
during operation
and all four suction
power indicator
lights start
blinking together.
z
Wait for about 30 seconds before you operate the
machine again. This lets the machine reset whilst you
identify one of the following possible causes.
z
The water has turned very dirt and mirky. Empty the
water container and replace with clean water.
z
The water level is above the maximum level. Reduce
the water level.
z
The selected suction power level is too high for the
current cleaning application. Reduce the suction
power.
z
The airflow is blocked. Remove the blockage.
z
The machine does
not start
z
AC supply is not properly connected the AC cord to
electrical supply.
z
Noticeable
decrease in the
suction power
z
The HEPA filter requires replacement. Change a new
one.
z
There is a blockage. Remove the cleaning tools and
attachments from the machine and remove the
blockage.
z
Leakage of water
when using for
cleaning of liquid
waste.
z
The Switch Float is blocked. Unblock it by cleaning.
