OSD-400/OSD-800/OSD-1600
Install & User Manual - Firmware 3.X
49
User mode can define to max. 16 channel.
As shown above picture, the 16ch DVR can be define between channel 1~16, the 8ch DVR from 1~8
and the 4ch DVR from 1~4.
4.6 Event Screen
When there is an event occurred, the green colour
[M]
and red colour
[S]
will be display from status
bar. In case of
[M]
displayed, the camera name will be turned to green colour, and it will turn to yellow
when Motion Detection event finish.
In case of
[S]
displayed, the camera name will be turned to red colour, and it will turn to yellow when
Sensor event finish.
It can be set to Pop-up automatically relevant screen when alarming.
Set pop-up period can be set into “Alarm Pop-up (sec)” inferior to “Monitor” menu.
At the simultaneous alarming in several channels, it displays the division as many channel as alarmed.
For example, when 3 channels alarm, 4 divisions is displayed on screen. And press any button to
return original channel.
1. If Alarm Pop-up Hold (sec) set to Off, Alarm Pop-up will not operate.
2. If Alarm Pop-up Hold (sec) set to Keep, it does not return to previous screen before press any
button
