11
The heater is almost fully assembled apart from the feet which need to be fitted using the 4 screws that
come with the unit. Attach the inner screws 1st and then the 2nd outer screws to ensure unit is perfectly
level.
1. Carefully remove the Heater from the carton.
2. Place the heater on a firm level surface.
3. Set the main power switch to ‘0’. Plug the cord set into a 220V electrical outlet.
4. Turn the main power switch to one of two positions: ‘1’ (1000W) or ‘2’ (2000W).
5. To turn the heater OFF, turn the main power switch to ‘0’ position.
The ‘Thermostat control’ controls the level of heat being emitted but is dependant on the heat
setting. Turn clockwise to increase the level of heat being emitted.
Note
: It is normal for the Heater to cycle ON and OFF.
1. A thermal overload protector is built in to prevent overheating.
2. When an overeater temperature is reached, the Heater will be automatically shut off .It can only
resume operation when the user resets the unit.
To Reset Heater:
1. Unplug the Heater and wait 15-20 minutes for the unit to cool down.
2. Then, turn on the unit again and operate normally.
1. Stainless steel safety grille.
2.
Chrome carry handles.
3. Power
indicator
4. Thermostat
control.
5. Power
switch.
6. Power
cord.
7. Stable
base.
PARTS NAME
OPERATION
THERMOSTAT INSTRUCTIONS
SAFETY FEATURES
1
2
4
3
5
6
7
ASSEMBLING THE HEATER