Assign an IP address
Most networks have a DHCP server that automatically assigns IP addresses to connected devices.
If your network does not have a DHCP server, the IP Camera will use 255.255.255.255 as the default IP
address.
In case you would like to assign a static IP address, the recommended method in Windows is IP Utility.
Recommended for Operating system
Windows 2000
Windows XP
Windows XP Pro
Windows 2003 Server
Windows Vista
Windows 7
Notes:
• In
case assigning the IP address fails, check whether there is no firewall blocking the operation.
Admin Tool
Admin Tool automatically discovers and displays the devices on your network. The application could
also be used to manually assign a static IP address.
Note that the computer running Admin tool must be on the same network segment (physical subnet)
as the IP Camera.
The default setting of the camera is set to “DHCP”.
If you have a DHCP server on your
network, you can find the net
work camera in “My network”.
If a DHCP server is not available on your network, please assign IP address by the following
process.
1) Execute Admintool.exe and click “Search” button.
2) After the camera is listed in camera list, select the camera.
3) Type in the all network information.
4) Click “Apply” button, the setting
will be showed in the list.
5) Click “Setting” Button to set network information to the camera.
Then double click the camera in the list, Internet explorer will open automatically
.