New Multi Function Controller
18
| ORION CO., LTD.
Infinitely Expandable
ORION CO., LTD. |
19
USB mode
4.
USB communication is performed based on RS-232C specification too. The external
interface is USB type and it is converted to RS-232C internally.
To execute USB mode, press USB LED switch on the front side of New MFC
1)
To control MPDP, connect to a computer with USB cable and use MSCS program.
2)
(Corresponding port should be selected)
ID 1
ID 4
ID 7
ID 2
ID 5
ID 8
ID 3
ID 6
ID 9
DVI-D_1
INPUT
OUTPUT
DVI-D_1
INPUT
OUTPUT
DVI-D_1
INPUT
OUTPUT
DVI-D_1
INPUT
OUTPUT
DVI-D_1
INPUT
OUTPUT
DVI-D_1
INPUT
OUTPUT
DVI-D_1
INPUT
OUTPUT
DVI-D_1
INPUT
OUTPUT
DVI-D_1
INPUT
OUTPUT
RS-232C
INPUT
OUTPUT
RS-232C
INPUT
OUTPUT
RS-232C
INPUT
OUTPUT
RS-232C
INPUT
OUTPUT
RS-232C
INPUT
OUTPUT
RS-232C
INPUT
OUTPUT
RS-232C
INPUT
OUTPUT
RS-232C
INPUT
OUTPUT
RS-232C
INPUT
OUTPUT
PWR ON
PWR OFF
DVI
HOR
VER
IR
PC
DVI 1/2
DTV
VIDEO
S-VIDEO
HDSDI
HDMI
DVIC1
DVIC2
IR
RS232
ETHERNET
USB
New MFC
MSCS control PC
USB
RS-232C
IR
RS232
ETHERNET
USB
DVI Signal Distributor
(UXGA : UP TO 165MHz)
How to install USB driver
Download a proper driver that fits FT232R type from http://www.ftdichip.com/Drivers/
1)
VCP.htm.
Unzip the downloaded file, "CDM 2.04.16 WHQL Certified.zip"
2)
When the New MFC and a computer is connected, it searches the driver for a new
3)
device. Set the path to the folder that the unzipped file is saved and start driver
installation.
"USB Serial Port" is registered at the Control panel. The communication port number is
4)
shown as "COM23", The number of each USB port may be changed.