Orion OPM-4250, Руководство пользователя

Страница: 39 / 45

- 74 -
OPM-4250 | OPM-4250R
- 75 -
Infinitely Expandable
"Get Current Status" Communication Sequence -
*Waitfor800msecforresponseaftersendingthecommand.Ifthereisnoresponse,itisrecommendedtoresendthecommand.
*Itisrecommendedthatnotsendingtheothercommandorchanginginputresolutionduringcommandtransmission.
Get Current Status Command transmission
(to Master or Slave)
→
←
Get Current Status Response transmission
(from Master or Slave)
get Picture Control Data 3.18.
Command for acquiring the current Picture Control Data(User Mode, White Balance, Graphic, Video) -
CMD: 0x88(Master), 0x68(Slave) -
It is available only on Power On (Operative) status. -
The values based on current Color Temp. (Normal Mode / Studio Mode) will be displayed.
-
Send to MPDP -
STX CMD Length
Data
ETX
ID M/S
Value 0x02 Variable 0x02 Variable Variable 0x03
*IDrange(Program):0x01(1)~0xFF(255) *M/S:Master(0x01),Slave(0x00)
*Itisnotapplicableas"Broad-cast"command.
Receive from MPDP -
STX CMD Length
Data
Check Sum ETX
ID M/S Values
Value 0x02 Variable 0x0D Variable Variable … Variable 0x03
*IDrange(Program):0x01(1)~0xFF(255)
*M/S:Master(0x01),Slave(0x00)
*Values(11byte)
No. Data Length Explanation
1 User Mode – Brightness 1 byte Range: 0(0x00) ~ 100(0x64)
2 User Mode – Contrast 1 byte Range: 0(0x00) ~ 100(0x64)
3 User Mode – Sharpness 1 byte Range: 0(0x00) ~ 28(0x1C)
4 User Mode – Color 1 byte Range: 0(0x00) ~ 100(0x64)
5 User Mode – Tint 1 byte Range: 0(0x00) ~ 90(0x5A)
6 White Balance – Gain R 1 byte Range: 0(0x00) ~ 255(0xFF)
7 White Balance – Gain G 1 byte Range: 0(0x00) ~ 255(0xFF)
8 White Balance – Gain B 1 byte Range: 0(0x00) ~ 255(0xFF)
9 White Balance – Offset R 1 byte Range: 0(0x00) ~ 255(0xFF)
10 White Balance – Offset G 1 byte Range: 0(0x00) ~ 255(0xFF)
11 White Balance – Offset B 1 byte Range: 0(0x00) ~ 255(0xFF)
"Get Picture Control Data" Communication Sequence -
*Waitfor800msecforresponseaftersendingthecommand.Ifthereisnoresponse,itisrecommendedtoresendthecommand.
*Itisrecommendedthatnotsendingtheothercommandorchanginginputresolutionduringcommandtransmission.
Get Picture Control Data Command transmission
(to Master or Slave)
→
←
Get Picture Control Data Response transmission
(from Master or Slave)
Factory Data Load (Picture Control Data): Only Master 3.19.
Command for loading the Picure Control data (User Mode / White Balance / RGB Data / DTV Data / DVD Data / -
VIDEO Data) adjusted in the factory. ( This is different from "Default Data Load")
It is usable only at Power on status and only Master is operating.
-
It shows the value based on current Color Temp. (Normal Mode / Studio Mode.) -
Data can be checked with "Get Picture Control Data" after executing the command -
Send to MPDP -
NormalCommand A.
STX CMD Length
Data
ETX
ID M/S
Value 0x02 0x83 0x02 Variable 0x01 0x03
*IDrange(Program):0x01(1)~0xFF(255) *M/S:SinceitisonlyMaster,"0x01"Valueistransmitted.
BroadcastCommand B.
*MakeallPDP(Master/Slave)dothesameoperation.But,therewillbenoreturncommunication.(Onewaycommand)
*ID:0x00
*M/S:SinceitisonlyMaster,“0x01”Valueistransmitted.
Receive from MPDP -
STX CMD Length
Data
Check Sum ETX
ID M/S
Value 0x02 0x83 0x02 Variable 0x01 Variable 0x03
*IDrange(Program):0x01(1)~0xFF(255) M/S:SinceitisonlyMaster,"0x01"Valueistransmitted..
*CheckSum:Execute"Not"operationafteraddingallthevaluesin"STX~Data"area.
"Factory Data Load" Communication Sequence -
*Waitfor40msecforresponseaftersendingthecommand.Ifthereisnoresponse,itisrecommendedtoresendthecommand.
*Itisrecommendedthatnotsendingtheothercommandorchanginginputresolutionduringcommandtransmission.
Factory Data Load Command transmission (to Master)
→
←
Factory Data Load Response transmission (from Master)
DVi Over-Scan On/Off 3.20.
Users can select Over-scan when input is DTV resolution from DVI. It is only available with DVI mode. -
CMD: 0xE4(On), 0xE5(Off) -
It is usable only at Power on status and only Master is operating. -
Send to MPDP -
NormalCommand A.
STX CMD Length
Data
ETX
ID M/S
Value 0x02 Variable 0x02 Variable Variable 0x03
*IDrange(Program):0x01(1)~0xFF(255)
*M/S:Master(0x01),Slave(0x00)
BroadcastCommand B.
STX CMD Length Data: ID ETX
Value 0x02 Variable 0x01 0x00 0x03
*MakeallPDP(Master/Slave)dothesameoperation.But,therewillbenoreturncommunication.(Onewaycommand)