Orion OPM-4240, Руководство пользователя

Страница: 29 / 36

54
OPM-4240 / OPM-4240R
55
Infinitely Expandable
Tracking Mode 3.9.
Automatic or Manual screen alignment or open previous configuration at PC RGB Mode.
-
Command Code:
-
0x4A (Auto-tracking), 0x4B (Get Tracking Values), 0x4C (Frequency- tracking), 0x4D (Phase-tracking),
0x4E (Line-Start tracking), 0x4F (Pixel-Start tracking)
Protocol format for each command
-
:Get Tracking Values - Two way communication (Send to PDP, Receive from PDP)
①SendtoPDP
STX CMD Length ID ETX
1 byte 1 byte 1 byte 1 byte 1 byte
Data: ID(1 byte)
-
②ReceiveFromPDP
STX CMD Length Data Check Sum ETX
1 byte 1 byte 1 byte 5 byte 1 byte 1 byte
Data: ID(1 byte) + Frequency(1 byte) + Phase(1 byte) + LineStart(1 byte) + PixelStart(1 byte)
-
Check Sum: Add all the values in "Data" area. Then perform "NOT" operation.
-
: Auto-tracking - One way communication (Send to PDP)
STX CMD Length Data ETX
1 byte 1 byte 1 byte 1 byte 1 byte
Data: ID (1 byte)
-
If you want to execute Auto-tracking for all MPDP, set the value of ID area as "0x00".
-
: Frequency-tracking - One way communication (Send to PDP)
STX CMD Length Data ETX
1 byte 1 byte 1 byte 2 byte 1 byte
Data: ID(1 byte) + Frequency(1 byte)
-
If you want to execute Frequency-tracking for all MPDP, set the value of ID area as "0x00".
-
: Phase-tracking - One way communication (Send to PDP)
STX CMD Length Data ETX
1 byte 1 byte 1 byte 2 byte 1 byte
Data: ID(1 byte) + Phase (1 byte)
-
If you want to execute Phase-tracking for all MPDP, set the value of ID area as "0x00".
-
: LineStart - tracking - One way communication (Send to PDP)
STX CMD Length Data ETX
1 byte 1 byte 1 byte 2 byte 1 byte
Data: ID(1 byte) + LineStart (1 byte)
-
If you want to execute LineStart-tracking for all MPDP, set the value of ID area as "0x00".
-
: PixelStart-tracking - One way communication (Send to PDP)
STX CMD Length Data ETX
1 byte 1 byte 1 byte 2 byte 1 byte
Data: ID(1 byte) + PixelStart (1 byte)
-
If you want to execute PixelStart-tracking for all MPDP, set the value of ID area as "0x00".
-
Input Mode Change 3.10.
This can be used for additional input mode change.
-
Command Code: 0x44 (DVI), 0x45 (PC), 0x46 (DTV), 0x47 (DVD), 0x48 (S-Video), 0x49 (Video)
-
One way communication (Send to PDP)
-
Data: ID (1 byte)
-
e.g.) ID No.1: Mode change for DVI, ID No. 2: Video
-
STX CMD Length ID ETX STX CMD Length ID ETX
Value 0x02 0x44 0x01 0x01 0x03 0x02 0x49 0x01 0x02 0x03
IfyouwanttosetthesameinputmodeforallMPDP,setthevalueofIDareaas"0x00". ※
APL Control 3.11.
APL On/Soft/Off
-
Command Code: 0x54 (APL On), 0x55 (APL Soft), 0x56 (APL Off)
-
One way communication (Send to PDP)
-
Data: ID (1byte)
-
e.g.) APL On after APL off of MPDP ID No.1
-
STX CMD Length ID ETX STX CMD Length ID ETX
Value 0x02 0x56 0x01 0x01 0x03 0x02 0x54 0x01 0x02 0x03
IfyouwanttosetthesameAPLstatusforallMPDP,setthevalueofIDareaas"0x00". ※
Video Zoom Control 3.12.
Default level of Video Zoom is "5", and can be set for "1" to "9".
-
Command Code: 0x6D
-
One way communication (Send to PDP)
-
Data: ID (1byte) + Zoom (1 byte)
-
e.g.) 9 times Zoom for MPDP ID No. 1
-
STX CMD Length Data ETX
Value 0x02 0x6D 0x02 0x01 0x09 0x03
IfyouwanttoapplythesameVideozoomlevelforallMPDP,setthevalueofIDareaas"0x00". ※
Color Temperature 3.13.
Normal mode 9300k, Studio mode 3600k
-
Generally, Normal mode is recommended. Studio mode is suitable for broadcasting. (Default: Normal mode)
-
Command Code: 0xB3 (Normal), 0xB4 (Studio: broadcasting)
-
One way communication (Send to PDP)
-
Data: ID (1 byte)
-
e.g.) Mode change from Studio mode to Normal mode for MPDP ID No.1
-
STX CMD Length ID ETX STX CMD Length ID ETX
Value 0x02 0xB4 0x01 0x01 0x03 0x02 0xB3 0x01 0x01 0x03
IfyouwanttohavethesamecolortemperatureforallMPDP,setthevalueofIDareaas"0x00". ※