3
PARTS DESCRIPTION
ASSEMBLY
The heater is packaged with the feet unattached. You must attach them before operating the
heater.
WARNING: Do not operate without feet attached. Do operate the heater only in upright
position (feet on the bottom, controls on the top), any other position could create a
hazardous situation.
1. Turn the heater upside down.
2. Position the wheel base assemblies between the end fins.
3. Attach them to the heater using the U-bolts and wing nuts supplied.
4. Tighten the wing nuts.
5. Turn the heater the right way up.
USE OF FAN HEATER
If you want to fasten the speed of heating efficiency when you turn on the unit power, you can
just push the fan heater switch “ON”, the room temperature will be raised in high speed. Push
the fan heater switch ”OFF”, the fan heater power will be off immediately.
1.
Carry handle
2.
Thermostat knob
3.
Power switch
4. Fan
switch
5.
Cord storage
6.
Radiant fins
7.
Castor
3
1
2
4
5
7
6