http://www.orion.ua
4
press 6:180min, 2h & 1h lamp on
press 7:210min, 2h, 1h & 0.5h lamp on
press 8:240min, 4h lamp on
press 9:270min, 4h & 0.5h lamp on
press 10:300min, 4h & 1h lamp on
press 11:330min, 4h, 1h & 0.5h lamp on
press 12:360min, 4h & 2h lamp on
press 13:390min, 4h,2h &0.5h lamp on
press 14:420min, 4h, 2h & 1h lamp on
press 15:450min. 4h, 2h, 1h & 0.5h lamp on
Control panel
MAINTENANCE AND STORING
1. Be sure to switch off the power supply and pull out the plug before cleaning.
2. This machine only needs common external cleaning and wiping.
3. Do not rub with gasoline, acid and alkali, in order to avoid fade and damage appearance.
4. When it is stored, it should be cooled and put in the box and in a dry, ventilation place.
SOLUTION TO SIMPLE FAILURE
When starting the fan, the fan blade doesn’t work. Please check whether the power plug has
really inserted into the socket or the cover has distorted, which has touched the fan blade. If the
noise comes when starting the fan, please check the unit as follows:
(1) Fan blade has been fight installed into the output shaft of motor.
(2) Groove on back of cover has matched the inserting groove on to the output shaft.
(3) There are tiny defective edge ring existing around the fan blade.
(4) The cover has distorted, which has touched the fan blade.
Power light indicators. LED display
Speed b/-
Swing button
Mode button: Sleep, Normal, Nature
Timer button
On/Off button