F.9
UK-4
SNOOZE SETTING (REMOTE CONTROL ONLY)
TO SET SLEEP FUNCTION (REMOTE CONTROL ONLY)
RADIO OPERATION
1. Press the SNOOZE button in the TIME ON mode , the system will be switched to
the STANDBY mode and " SNOOZE " appears on the display.(F.8)
2. Five minutes later, the system will be switched on automatically to reach TIMER ON mode and
start playing , then "TIMER " is flashing on the display.
3. The system will be switched off automatically one hour later.
1. If you want to fall asleep to music, press the SLEEP button .
2. You may adjust the Radio or CD player's sleep function to play from 90, 80, 70 up to 10 minutes
of music before shutting itself off automatically.
1. Press the TUNER button to select the Radio operation.
2. Waveband range will appear on the display.
3. Select the desired waveband with the STOP/BAND button.
Manual tuning
1. To tune for weak stations, use manual tuning by pressing TUNING / SKIP / SEARCH UP or DOWN
button continuously until you read the correct frequency or the reception is at its best.
2. When you want to select FM stereo station, press the FM ST/ MODE button / indicator first . When
you receive a FM stereo station the " " indicator appears on the display, you
can receiving FM stereo transmission .(F.9)
3. When you press the FM ST/ MODE button again , the FM STEREO indicator will turn off & in MONO
FM status.(F.10)
Note:
When the FM stereo signal is weak the sound may be of poor quality. If this happens switch the FM
selection mode to the MONO position , the interference will be less but the reception will be
monophonic.
Automatic tuning
1. Press the TUNING / SKIP / SEARCH UP or DOWN button for a second or more, then release
the button. The tuner will automatically search for the first station of sufficient signal strength.
2. Repeat the above procedure if you wish to select another station.
F.5
F.6
F.7
F.8
F.10
