Orion HCCA 10.2 Скачать руководство пользователя страница 3

INTRODUCTION

Thank you for your purchase of the Orion HCCA SubWoofers. These woofers
represent a combination of incredible performance and value. The HCCA series
subwoofers feature a massive 4" voice coil and triple stacked magnet assembly to
maximize excursion and output. Capable of maintaining their balance at
exceptionally high output levels. These high-performance woofers are built with dual
2 or 4 ohm voice coils, to get the most out of your amplifier. They are available in
standard 10”, 12” and 15” sizes.

We at Orion strive to give you all the latest up to date information about this product.
What we can’t give you in this manual is personal installation or technical experience.
If you have questions concerning the use or application of this product, please refer
to the nearest Authorized ORION Dealer for assistance, visit www.orioncaraudio.com,
or call the Orion technical support hotline at 1-800-876-0800.  As we are always
finding new ways to improve our product, the features and specifications are subject
to change without notice.

PRACTICE SAFE SOUND™

Continuous exposure to sound pressure levels over 100dB may cause permanent
hearing loss.  High powered automotive sound systems can generate sound pressure
levels in excess of 130dB.  When playing your system at high levels, please use hearing
protection and prevent long term exposure.

INSTALLATION

The performance of these HCCA subwoofers is directly proportional to the quality of
installation. Care taken during the installation process will be rewarded with years of
satisfying performance. If you are unsure about your installation capabilities, please
refer to your local Authorized Orion Dealer for technical assistance. Orion dealers are
trained professionals dedicated to extracting the maximum performance out of your
Orion system. If you decide to install this speaker system yourself, please read the
entire section on sealed and vented enclosures before starting your installation.

Please Note: Due to the extremely long excursion and high temperature possibilities
of this woofer, it is recommended that when the woofer is installed it be positioned
so that the cone either faces upward or downward only.

3

Содержание HCCA 10.2
























Отзывы: