GST-410
1/3" SONY SUPER HAD CCD
752(H) x 582(V) Pixel
6.5㎛(H) x 6.25㎛(V)
600 TV-Line
PAL
Internal
2:1 Interlace
1.0 Vp-p(Sync. Negative) Termination 75Ω±10%
γ= 0.45(Adjustable)
0.1Lux(F/1.2)
Full OSD
ON / OFF Selectable(64 Zone)
ATW / AWC / MANUAL
ON / OFF Selectable(4 Zone)
Electronic D&N(AUTO, COLOR, B/W)
48dB over(AGC OFF)
ON / OFF
DWDR / BLC / HLC / OFF
YES
Extra Video connector for easy installation
Automatic(Adjustable)
1/50~1/100,000sec
Average test illuminance by front view
Regulated 12V DC ±10%
Max. 130mA(at 12V DC)
Vari-focal auto iris lens
-10 ∼ 50℃
-20 ∼ 60℃
Ø150.5 x 95.6(H)mm
Approx. 750g
Ⅱ
Model No.
Image Sensor
Effective Pixel
Cell Size
TV Type
Sync. Type
Scanning System
Video Output
Gamma Characteristic
Min. Illumination
OSD
Motion Detection
White Balace
Privacy Zone
Day & Night
S/N Ratio
Mirror
Backlight
Control Interface
Gain Control
Shutter
Test Illuminance Area
Current Consumption
Operation Temp.
Preservation Temp.
Dimension
Weight
Resolution
Reverse Polarity Protection
Power Supply
Lens
◐SPECIFICATION
4. IMAGE
ADJUST
3. DAY&NIGHT
2. WHITE
BALANCE
PATTERN
GENERATOR
3B15939A
www.orion-technology.eu
◐ FUNCTION SETTING
1. How to use the jog lever
①ENTER :
②
③
④
⑤
⑥EXT-VIDEO :
ㆍPush the lever : Used to access the menu and confirm selection.
ㆍPush the lever for one second :
Used to return to previous menu
from the motion detection setting section or privacy mask
setting section.
It is used for upgrading the product function
and after-sales services.
⑦DEBUG PORT :
UP,
DOWN :
LEFT,
RIGHT :
Used to move the cursor to up or down.
Used to move the cursor to left or right and change
the value.
Extra video output terminal for installation.
Plug your test monitor in hear. The cable is option.
7
6
2. OSD menu structure
Fixed focal lens or Vari-focal auto iris lens
In case of manual lens selection, adjust the
brightness
Shutter speed auto adjustable
Select shutter speed manually
Determines that use the AGC function or not
and AGC level selectable(You can not use the
Auto D&N change mode when AGC is off)
Digital Wide Dynamic Range
BLC function
High Light Mask function
In case of AUTO mode, the function will off in
daytime and on at night
According to the threshold value, the camera
will recognize as High light or not
Color temperature 2500 ~ 9500°
K
Adjust the Red or Blue values to shift the color
of the object
Move the camera lens toward to white paper
then press the set button to find the optimal
white balance for current environment
Auto day&night switching mode
Fixed at color
Fixed at B/W
Determines whether to transmit the burst signal
or not in B/W mode
You can select brightness of illumination about
changing the day ↔ night mode
You can select the duration time about chaining
the day ↔ night mode
N/A for W/O LED version
N/A for W/O LED version
Set a horizontal image inversion
Sharpness adjustable
Gamma adjustable
Determines whether to use the brightness
compensation of four lens' corners(LSC) or not
The LSC level selectable
Adjust Red tone of the image
Adjust Blue tone of the image
LENS
E.SHUTTER
AGC
DWDR
BLC
HLC
AWB MODE
D&N MODE
LED LEVEL
DYNAMIC IR
MIRROR
SHARPNESS
GAMMA
LSC
R-Y GAIN
B-Y GAIN
BRIGHT
HLC THR
BURST
DELAY TIME
LSC LEVEL
MANUAL, DC
0 ~ 100
AUTO
1/50 ~
1/100,000
OFF, LOW,
MIDDLE, HIGH
OFF, LOW,
MIDDLE, HIGH
OFF, ON
OFF, ON,
AUTO
0 ~ 100
ATW
MANUAL
AWC
AUTO
COLOR
B&W
OFF, ON
117 ~ 200
82 ~ 165
3 ~ 15
OFF, LOW,
MIDDLE, HIGH
OFF, ON
OFF, ON
0 ~ 50
OFF, ON
0 ~ 50
0 ~ 200
0 ~ 200
0.45, 0.6, 1,
USER
1. EXPOSURE
Function
setting menu Select menu
Contents
Sub menu
Test signal. Press the set button, color bar appeared on the screen
and press any key to return to menu
COLOR
B&W
B&W
COLOR
→
→
※All specification is subject to change without notice to improve the quality.
Determines whether to use the motion detection
function or not
No display on the screen though movement
is detected
The words 'MOTION' appear on the screen
when movement is detected
Motion detection area appear on the screen
when movement is detected
Motion detection sensitivity
Set the duration of outside alarm. If the way of
display is message, it means display time of
message
Display each privacy mask or not. Press the
set button to move into the privacy mask
setting section, whenever you press the set
button, the mask color is changed. When the
mask color is red you can adjust the size by
up, down, left and right button. When the
mask color is blue you can set the position of
mask by up, down, left and right button. Press
the set button for a few second to escape
Select mask color
Select the camera ID for RS-485 communication
Select baud rate
Select protocol
Select language
Display the camera ID on the screen
Not available
Not available
OFF, ON
NONE
MESSAGE
MASK
0 ~ 255
1 ~ 15
OFF, LOW,
MIDDLE, HIGH
1 ~ 15
OFF, ON
1 ~ 255
2400 ~ 9600
ENGLISH, …
OFF, ON
BLACK,
GRAY…
PELCO-D,
PELCO-P
MOTION
IMPACT
MASK
1, 2, 3, 4
CAM ID
BAUDRATE
PROTOCOL
LANGUAGE
DISPLAY
SET
WINDOW
ALL SET↓
SENSITIVITY
HOLD TIME
HOLD TIME
EDIT
POSITION
MASK
COLOR
NAME
DISPLAY
6. PRIVACY
MASK
7. COMMUNI-
CATION
(Not available)
10. EXIT
9. FACTORY
SET
5. MOTION &
IMPACT
8. SPECIAL
ALL CLEAR↓
Press the set button to move into the motion detection area
section to set the 64 areas. Press the set button for a few second
to move out
Press the set button to select all area
Press the set button to remove all area
※If you change the COMMUNICATION value through RS-485, you might not
control the camera due to unmatched value(If your camera is out of working
due to above reason, change your controller's value or wait a few minute till
close the menu, it will be back to previous setting value)
Press the set button to move into the name setting section. You
can choose the letter by using up and down button and move
next letter by using left and right button. Press the set button for
a few second to move out
Press the set button to move into the position setting section.
You can move the camera ID to your wanted position by using
up, down, left and right button
To reset your camera to factory default condition
Notice : Lens, communication and language is not changed
Save the value and then restart
