BASIC OPERATION
13
ROCK
POP
CLASSIC
EQ OFF
Volume
Subwoof
Treble
L-front
R-front
L-rear
R-rear
Bass
Middle
TILT
1.Reset the Unit
When operating the unit for the first
time or after replacing the car battery,
you must reset the unit.
Remove the guard against theft front panel
at first, then press
RESET
button
with a pointed object, (such as a
ball-point pen) to set the unit to initial
status.
This function can only be operated
by the head unit.
2.Turning the Unit On/Off
Press PWR
button to turn on the unit.In
unit ON,when insert a disc,the unit will
automatically start playing.
Long pressing it to turn off the unit
completely.
Pressing PWR button on the head unit
also performs the same operation.
3.Volume Control
Press VOL+ button on the remote
control to increase the sound level and
press VOL- button on the remote
control to decrease the sound level.
Rotating VOL button on the head
unit or touching the VOL-/VOL+ on the
TFT panel also performs the same
operation.
4.Setting the Sound Characteristics
Repeatedly press SEL button to select
the desired mode in the following order:
Note:
* After selecting the desired mode,
you can adjust the current level by
pressing VOL
buttons on the
remote control
.
,
* If you don t adjust VOL
button in 3
seconds after selecting the desired
mode, the unit will automatically
return to the current mode being
displayed.
5.Turning Loudness On/Off
Short press LOUD
button on the remote
control to activate loud function.
Press it again to shut down LOUD
function.
6.EQ Setting
While listening to music, you can
select the corresponding preset
(popular/classic /rock) modes, you can
adjust the sound texture more precisely
by using EQ
button on the remote control.
Repeatedly pressing EQ button to
choose the following modes in turn:
