Orion AG 360 RoboWrapper, Руководство пользователя

Страница: 13 / 92

Orion Machine Manual
Revision 1.1 AG 360 RoboWrapper
28 June 2017 Introduction and Safety
Page 1-3
Safety
Orion's stretch wrappers should be operated with caution and common sense as any other
industrial equipment. To prevent injury and/or electrical shocks, careful operation of the
machine and awareness of its many automatic functions is required. All electrical power
and compressed air must be disconnected prior to all inspection, maintenance or repair
work. At Orion, we are committed to building quality packaging and material handling
equipment. To achieve this, our machines must be efficient, easy to maintain, and safe to
operate. Before attempting to operate the equipment, become familiar with the safety rec-
ommendations and operational components of your AG 360 RoboWrapper. You should
also become familiar with the technical information pertaining to components used within
the system, including their operating and safety features. This information is located in the
Vendor Data Manual and in other literature supplied with the equipment. To maximize
machine safety and efficiency you must operate the machine correctly and comply with
the safety features described.
Stay alert and remember : Safety is the responsibility of
everyone who operates or services your BEC system.
System Safety Recommendations
Safeguarding personnel that operate and/or maintain automated equipment is the primary
consideration. Because it is very dangerous to enter the operating space of the AG 360
RoboWrapper during operation, adequate safeguards must be in place and safety precau-
tions must be observed. The following general precautions are recommended for all per-
sonnel who perform system operation or maintenance.
•
Do lockout-tagout procedures whenever you do maintenance and repair work.
• All personnel who repair, maintain, or operate the equipment need to know the loca-
tion of all EMERGENCY STOP buttons.
• Do not operate the equipment with any of the safety guards removed.
• Do not wear neckties, loose clothing, or long loose-hanging hair around any equip-
ment.
• Observe and follow the DANGER, WARNING, and CAUTION messages throughout
this manual, in vendor manuals, and displayed on the equipment.
• Personnel should attend all available safety and operational training courses.
• Personnel should know and follow the recommended safety procedures whenever
they must enter the packaging systems motion area.
• Personnel should not enter the working path of the machine while control power is
"ON".
• Personnel should not power up the system if someone is in the working path of the
machine.
• The system should be powered down when not in use.
• Personnel should pay special attention to all the posted warnings and cautions located
on any devices. Observe all safety and/or precautionary steps and procedures when
working with the system.
• Personnel should keep the system clean to make it easier to spot hazards.