4
Software and
Driver Installation
Before the camera can be used, image
capture software must be installed onto
your computer. Turn on your computer and
allow the Windows operating system to load
as normal. Insert the included CD-ROM
into your computer’s CD-ROM drive, and
the Launcher will appear
(Figure 2)
. This
allows you to install the Orion image cap-
ture software (Orion AmCap),.
Capture Software Installation
1. Click
Install Capture Software.
2. The
Orion AmCap Setup Wizard
appears. Click
Next.
3. Select a destination folder and Click
Next.
4. Click
Next again to start the
installation.
5. When the wizard is complete, click
close. This has installed the capture
software.
6. When installation is complete click
the
Finish
button.
7. Plug in the camera into your
computer’s USB port. A
Found New
Hardware
notification will appear in
your Windows task bar
(Figure 3
).
8. Wait a few moments and the camera
will automatically install on your
computer. When
Device Installed
Successfully
notification appears
you will be ready to use the camera.
9. Open Orion AmCap from the icon
on your desktop. The
Live Video
Window
should appear (
Figure 4
).
The software will recognize many cameras so check that Vimicro USB2.0
UVC
PC Camera
is selected from the device menu.
Figure 3.
When initially connecting the
SSUEII to a computer, a Found New
Hardware notification will appear and
automatically install the camera to your
computer.
Figure 4.
The live video window.
Figure 2.
The launcher provides an
easy menu for software installation.