ORION TELESCOPES & BINOCULARS Atlas 10 EQ 9874 Скачать руководство пользователя | Manualshive

Страница: 20 / 20

background image

One-Year Limited Warranty

This Orion Atlas 10 EQ is warranted against defects in materials or workmanship for a period of one year from the date
of purchase. This warranty is for the benefit of the original retail purchaser only. During this warranty period Orion
Telescopes & Binoculars will repair or replace, at Orion’s option, any warranted instrument that proves to be defective,
provided it is returned postage paid to: Orion Warranty Repair, 89 Hangar Way, Watsonville, CA 95076. If the product is
not registered, proof of purchase (such as a copy of the original invoice) is required.

This warranty does not apply if, in Orion’s judgment, the instrument has been abused, mishandled, or modified, nor
does it apply to normal wear and tear. This warranty gives you specific legal rights, and you may also have other rights,
which vary from state to state. For further warranty service information, contact: Customer Service Department, Orion
Telescopes & Binoculars, P. O. Box 1815, Santa Cruz, CA 95061; (800) 676-1343.

Orion Telescopes & Binoculars

Post Office Box 1815, Santa Cruz, CA 95061

Customer Support Help Line (800) 676-1343 • Day or Evening

20

«
...
18
19
20

Содержание Atlas 10 EQ 9874





















Отзывы:

Нет отзывов

Похожие инструкции для Atlas 10 EQ 9874

Бренд: Celestron Страницы: 47

76mm Cassegrain Telescope

Бренд: TwinStar Страницы: 3

Бренд: Yukon Страницы: 2

Бренд: Orbitor Страницы: 14

Бренд: Orion Страницы: 8

Ferrari ZenithStar Racing

Бренд: William Optics Страницы: 2

Бренд: Vixen Страницы: 2

Бренд: Vixen Страницы: 6

Бренд: Vixen Страницы: 6

Бренд: Vixen Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды