Orion Technology IC110HF011PT13, Руководство по эксплуатации

Страница: 29 / 37

System Event
Select System Event and configure system event
settings. With system event enabled, system status,
alarm in status, and disk status will be checked
periodically and corresponding alerts will be generated.
• Alarm In Bad: Select to check the alarm in status and
then set up a schedule.
- Send Email : Select to send out an email if no
change is detected in the alarm in status.
- Remote Callback: Select this option to send a
message to a remote system when the SD card is
inserted/removed and then select which system to
send the message to.
• Disk In/Out : Select to check if the SD card has been
inserted/removed.
- Send Email : Select to send out an email when the
SD card is inserted/removed.
- Remote Callback : Select this option to send a
message to a remote system when the SD card is
inserted/removed and then select which system to
send the message to.
• System Alive : Select to check the system status and
then set up a schedule.
- Send Email : Select to send out an email when the
system comes on line.
- Remote Callback : Select this option to send a
message to a remote system when the system
comes on line and then select which system to send
the message to.
• Email and Remote Callback settings under Event
Action must be configured correctly in order to
send out emails and messages.
• Remote Callback is not supported on Web Viewer.
• The camera must be registered to the remote
system in order to use the
Remote Callback
feature.
28