manualshive.com logo in svg

ORiNG Transporter TAP-3120-M12, Руководство пользователя, Страница: 31 / 49

Поделиться
Скачать
ORiNG Transporter TAP-3120-M12 Скачать руководство пользователя страница 31

TAP-3120-M12  User’s Manual 

ORing Industrial Networking Corp.                                                26 

Fragmentation Threshold.    Setting the Fragmentation Threshold 
too low may result in poor network performance.    Only minor 
modifications of this value are recommended. 

RTS Threshold 

This value should remain at its default setting of 2347.    The 
range is 0-2347 bytes.    Should you encounter inconsistent data 
flow, only minor modifications are recommended.    If a network 
packet is smaller than the preset RTS threshold size, the 
RTS/CTS mechanism will not be enabled.    The AP sends 
Request to Send (RTS) frames to a particular receiving station 
and negotiates the sending of a data frame.    After receiving an 
RTS, the wireless station responds with a Clear to Send (CTS) 
frame to acknowledge the right to begin transmission. 

Xmit Power 

This value ranges from 1 - 100 percent, default value is 100 
percent. 

Wireless Network 
Mode 

If you have Wireless-G and 802.11b devices in your network, then 
keep the default setting, BG Mixed mode.    If you have only 
Wireless-G devices, select G Mode.    If you would like to limit 
your network to only 802.11b devices, then select B Mode. If you 
would like to use 802.11a devices then select A only mode. 

Transmission Rate 

The default setting is 

Auto

.  The range is from 1 to 54Mbps.   

The rate of data transmission should be set depending on the 
speed of your wireless network.    You can select from a range of 
transmission speeds, or keep the default setting, Auto, to have 
the AP automatically use the fastest possible data rate and enable 
the Auto-Fallback feature.    Auto-Fallback will negotiate the best 
possible connection speed between the AP and a wireless client. 

Preamble 

Values are Long and Short, default value is Long.    If your 
wireless device supports the short preamble and you are having 
trouble getting it to communicate with other 802.11b devices, 
make sure that it is set to use the long preamble 

SSID Broadcast 

When wireless clients survey the local area for wireless networks 
to associate with, they will detect the SSID broadcast by the AP.   
To broadcast the AP SSID, keep the default setting, Enable.    If 
you do not want to broadcast the AP SSID, then select Disable. 

X-Roaming 

Disable: 

Disable X-Roaming protocol. 

Standard:

 Roaming group does not require the same wireless 

channel, but slower to switch than the “fixed channel” mode 

Содержание Transporter TAP-3120-M12


















































Отзывы:

Нет отзывов