TGAP-W1601+ Series User Manual
ORing Industrial Networking Corp
13
Step 2
: Hold the device upright against the wall
Step 3
: Insert four screws through the large opening of the keyhole-shaped apertures at the
top and bottom of the plate and fasten the screw to the wall with a screwdriver.
Step 3
: Slide the device downwards and tighten the four screws for added stability.
Instead of screwing the screws in all the way, it is advised to leave a space of
about 2mm to allow room for sliding the device between the wall and the screws.
3.2 Pole Mounting
You can mount the device to a pole using adjustable steel band straps included in the kit.
When installing the device to a pole:
Step 1
: Attach the mounting plate to the back of the device using four screws. The plate can
be attached vertically or horizontally to the device based on the space available.
