Q I G
Quick Installation Guide
PRINTED ON RECYCLED PAPER
Q
uick
I
nstallation
G
uide
Q I G
S w i tc h
E N 5 0 1 5 5
I N D U S T R I A L
Specifications
ORing Industrial Networking Corp.
Copyright© 2021 ORing
All rights reserved.
TEL: +886-2-2218-1066
FAX: +886-2-2218-1014
Website: www.oringnet.com
E-mail: [email protected]
Version 1.4
EN50155 5-port lite-managed
Ethernet switch
TES-250-M12
Power
Input Power
Power Consumption(Typ.)
12-48VDC on 5-pin female A-coding M12 connector
3Watts@12VDC/0.25A, 48VDC/0.062A
Physical Characteristic
Enclosure
IP-30
Dimension (W x D x H)
88.9(W) x40(D) x 178.2(H) mm (3.5 x 1.57 x 7.02 inch.)
Weight (g)
454 g
Environmental
-40 to 85 C (-40 to 185 F)
o
o
Storage Temperature
5% to 95% Non-condensing
Operating Humidity
Regulatory Approvals
CE EMC (EN 55024, EN 55022), FCC Part 15 B, EN 50155(EN 50121-1, EN 50121-3-2)
EMC
EN 55024 (IEC/EN 61000-4-2 (ESD: Contact 4KV),
IEC/EN 61000-4-3 (RS 80MHz to 1GHz: 3V/m 1kHz 80% AM),
IEC/EN 61000-4-4 (EFT Power 0.5KV, Signal 0.5KV),
IEC/EN 61000-4-5 (Surge: Power 0.5KV, RJ45 1KV),
IEC/EN 61000-4-6 (CS 150K-80MHz: 3Vrms 1kHz 80% AM), IEC/EN 61000-4-8(PFMF),
IEC/EN 61000-4-11 (DIP))
EN 50121-3-2 (IEC/EN 61000-4-2 (ESD: Contact 6KV),
IEC/EN 61000-4-3 (RS 80MHz to 1G/2.1G/2.5GHz: 20V/10V/5V/m 1kHz 80% AM),
IEC/EN 61000-4-4 (EFT Power 2KV, Signal 2KV), IEC/EN 61000-4-5 (Surge: Power 1KV),
IEC/EN 61000-4-6 (CS 150K-80MHz: 10Vrms 1kHz 80% AM), IEC/EN 61000-4-8(PFMF),
IEC/EN 61000-4-11 (DIP))
EMS
IEC60068-2-27
Shock
IEC60068-2-31
IEC60068-2-6
Vibration
Free Fall
Warranty
5 years
LED Indicators
Power Indicator (PWR)
Ring Master Indicator (R.M.)
Green: Power LED x 1
Green: Indicate system operated in O-Ring Master mode
EN 60950-1 compliant
Safety
10/100Base-T(X) M12 Port
Indicator
Top Green LED for Link/Act indicator: Green for link-up, Off for link-down, Blinking for Act.
Bottom Green LED for O-Ring function indicator: Green for O-Ring enabled, Off for O-Ring disabled,
Blinking for Ring is broken
Overload Current Protection
Reverse Polarity Protection
Present
Present
-40 to 70 C (-40 to 158 F)
o
o
Operating Temperature
ORing Switch Model
10/100 Base-T(X) Ports in
M12 Auto MDI/MDIX
5 x M12 connector (4-pin M12 female D-coding)
Physical Ports
Technology
Ethernet Standards
IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX
IEEE 802.3x for Flow control
IEEE 802.1D for STP (Spanning Tree Protocol)
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
TES-250-M12
2K
MAC Table
1Mbits
Store-and-Forward
Processing
Switching latency: <7 µs
Switching bandwidth: 1Gbps
Throughput (packet per second): 744Kpps@64Bytes packet
VLAN: port-based
Switch Properties
Enable/Disable ports
VLAN to segregate and secure network traffic
SNMP v3 encrypted authentication and access security
Security Features
STP/RSTP (IEEE 802.1D/w)
Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units
Port configuration, status, statistics, monitoring, security
Software Features
O-Ring
O-Chain
Fast recovery
STP
RSTP
Network Redundancy
Packet Buffer Size
Reset Function
Reset Button
< 5 sec: System reboot, > 5 sec: Factory default
EN 55032, CISPR32, EN 61000-3-2, EN 61000-3-3, FCC Part 15 B class A
EMI
EN 50155 (IEC 61373)
Other
MTBF
1,437,990 hrs.
TES-250-M12