TAR-120-M12 / TAR-3120-M12 User’s Manual
ORing Industrial Networking Corp. 11
M
anagement Interface
5.1 First-time
Installation
Before installing the TAR-120-M12 / TAR-3120-M12 WLAN AP router, you need to
access WLAN AP router with a computer via wired LAN connection or wireless LAN
interface. Using wired LAN connection is much easier and is highly recommended.
Basic connection for TAR-120-M12 / TAR-3120-M12
Step 1: Select the Power Source
TAR-120-M12 / TAR-3120-M12 AP router can be powered by +12~48V DC power input.
Step 2: Connect a computer to TAR-120-M12 / TAR-3120-M12
Use an appropriate Ethernet cable (e.g. RJ-45 to M12) to connect the ETH2 port of
TAR-120-M12 / TAR-3120-M12 AP router to the LAN port of a computer. If the LED of
the LAN port lights up, it indicates that the connection is established. After that, the
computer will initiate a DHCP request to get an IP address from the AP router.
