ORiNG RGS-9244GP Скачать руководство пользователя страница 143

Страница: 143 / 171

RGS-9244GP Series User Manual

ORing Industrial Networking Corp.

142

or destination (tx) mirroring enabled are mirrored to this port. Disabled option disables mirroring.

Label

Description

Port

The switch port number to which the following settings will be applied.

Mode

Drop-down list for selecting a mirror mode.

Rx only

: only frames received on this port are mirrored to the mirror port. Frames

transmitted are not mirrored.

Tx only

: only frames transmitted from this port are mirrored to the mirror port.

Frames received are not mirrored.

Disabled

: neither transmitted nor recived frames are mirrored.

Enabled

: both received and transmitted frames are mirrored to the mirror port.

Note: for a given port, a frame is only transmitted once. Therefore, you cannot

mirror Tx frames to the mirror port. In this case, mode for the selected mirror port

is limited to

Disabled

Rx nly

5.10.4 System Log Information

This page provides switch system log information.

Содержание RGS-9244GP












































































































































































Результаты поиска

Содержание RGS-9244GP

Отзывы:

Похожие инструкции для RGS-9244GP

Бренды по названию

Популярные бренды

ORiNG RGS-9244GP, Руководство пользователя

Результаты поиска

Содержание RGS-9244GP

Отзывы:

Похожие инструкции для RGS-9244GP

Бренды по названию

Популярные бренды