Q I G
Quick Installation Guide
PRINTED ON RECYCLED PAPER
Version 1.0
Q
uick
I
nstallation
G
uide
Resetting
To reboot the switch, press the
button for 5 seconds.
To restore the switch configurations back to the factory defaults, press the
button for 10
seconds.
Reset
Reset
Specifications
ORing Switch Model
Physical Ports
Technology
Ethernet Standards
10/100/1000Base-T(X) with
Ports in RJ45 Auto MDI/MDIX
Switch Properties
Security Features
Device Binding security feature
Enable/disable ports, MAC based port security
Port based network access control (802.1x)
Single 802.1x and Multiple 802.1x
MAC-based authentication
QoS assignment
Guest VLAN
MAC address limit
VLAN (802.1Q) to segregate an secure network traffic
Radius centralized password management
SNMPv3 encrypted authentication and access security
Https / SSH enhance network security
Web and CLI authentication and authorization
Authorization (15 levels)
IP source guard
22
IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX and 100Base-FX,
IEEE 802.3z for 1000Base-X,
IEEE 802.3ab for 1000Base-T,
IEEE 802.3x for Flow control,
IEEE 802.3ad for LACP (Link Aggregation Control Protocol )
IEEE 802.1p for COS (Class of Service)
IEEE 802.1Q for VLAN Tagging
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)
IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol)
IEEE 802.1x for Authentication
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
Switch latency: 7 us
Switch bandwidth: 52Gbps
Max. Number of Available VLANs: 4095
VLAN ID Range : VID 1 to 4094
IGMP multicast groups: 128 for each VLAN
Port rate limiting: User Define
MAC Table
8K
Processing
Store-and-Forward
Priority Queues
8
Jumbo frame
Up to 9.6K Bytes
Environmental
-40 to 85 C (-40 to 185 F)
o
o
Storage Temperature
Operating Temperature
Physical Characteristic
Dimension (W x D x H)
Weight (g)
2850g
5% to 95% Non-condensing
Operating Humidity
Regulatory Approvals
Enclosure
19 inches rack mountable
443.7 (W) x 200 (D) x 44 (H) mm
(17.47 x 7.87 x 1.73 inches)
FCC Part 15, CISPR (EN55022) class A
EMI
EN61000-4-2 (ESD)
EN61000-4-3 (RS)
EN61000-4-4 (EFT)
EN61000-4-5 (Surge)
EN61000-4-6 (CS)
EN61000-4-8
EN61000-4-11
EMS
Warranty
5 years
Warranty
5 years
Managed Gigabit PoE Ethernet Switch
RGS-92222GCP-NP
Gigabit Combo port with
10/100/1000Base-T(X) and
100/1000Base-X SFP ports
2
100/1000Base-X with SFP port
2
-40 to 75 C (-40 to 167 F)
o
o
IEC60068-2-27
Shock
IEC60068-2-32
Free Fall
IEC60068-2-6
Vibration
EN60950-1
Safety
Console cable
Use the provided DB-9 cable (RS-232 cable) to connect the switch to a PC with the DB-
9 connector attached to the switch console port and the DB-9 female connector to the
PC.
PC pin out (male)
assignment
RS-232 with DB9
female connector
Pin #2 RD
Pin #2 TD
Pin #3 TD
Pin #3 RD
Pin #5 GND
Pin #5 GND
RS-232 Serial Console Port
Software Features
IEEE 802.1D Bridge, auto MAC address learning/aging and MAC address (static)
Multiple Registration Protocol (MRP)
MSTP RSTP/STP compatible)
Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units
TOS/Diffserv supported
Quality of Service (802.1p) for real-time traffic
VLAN (802.1Q) with VLAN tagging
IGMP v2/v3 Snooping
IP-based bandwidth management
Application-based QoS management
DOS/DDOS auto prevention
Port configuration, status, statistics, monitoring, security
DHCP Server/Client
DHCP Relay
Modbus TCP
DNS client proxy
SMTP Client
NTP server
(
Network Redundancy
O-Ring, Open-Ring, O-Chain, MRP, Fast Recovery, MSTP (RST/PSTP compatible)
RS-232 in DB-9 connector with console cable. 115200bps, 8, N, 1
Power
Power consumption(Typ.)
22 Watts
Overload current protection
Present
Overload current protection
100~240VAC with power socket
M A N A G E D
Rack-Mount
GIGABIT
SWITCH
10/100 Base-T(X) MDI/MDI-X
Pin Number
MDI port
MDI-X port
1
TD+(transmit) RD+(receive)
2
TD-(transmit)
RD-(receive)
3
RD+(receive) TD+(transmit)
4
Not used
Not used
5
Not used
Not used
6
RD-(receive)
TD-(transmit)
7
Not used
Not used
8
Not used
Not used
1000Base-T MDI/MDI-X
Pin Number MDI port
MDI-X port
1
BI_DA+
BI_DB+
2
BI_DA-
BI_DB-
3
BI_DB+
BI_DA+
4
BI_DC+
BI_DD+
5
BI_DC-
BI_DD-
6
BI_DB-
BI_DA-
7
BI_DD+
BI_DC+
8
BI_DD-
BI_DC-
Wiring
AC Power Connection
Both RGS-92222GCP-NP and RGS-92222GCP-NP-E can be powered by AC electricity.
Simply insert the AC power cable to the power connector at the back of the
switch and turn on the power switch. The input voltage is 100V~240V / 50~60Hz.
DC Power Connection
The RGS-92222GCP-NP-E supports dual DC power
supplies, Power Supply 1 (PWR1) and Power Supply 2
(PWR2). The connections for PWR1, PWR2 and the RELAY
are located on the terminal block. The input voltage is
36V~72VDC.
STEP 1:
STEP 2:
Insert the negative/positive wires into the V-/V+ terminals, respectively.
To keep the DC wires from pulling loose, use a small flat-blade
screwdriver to tighten the wire-clamp screws on the front of the terminal block
connector.
Relay contact
Grounding
The RGS-92222GCP-NP-E provides two sets of relay contacts on the 6-pin terminal
block to detect user-configured events. The two wires attached to the fault contacts
form an open circuit when a user-configured when an event is triggered. If a user-
configured event does not occur, the fault circuit remains closed.
The RGS-92222GCP-NP-E provides grounding and wire routing to help limit the
effects of noise due to electromagnetic interference (EMI). Run the ground connection
from the ground screws to the grounding surface prior to connecting devices.
ORing Industrial Networking Corp.
Copyright© 2015 ORing
All rights reserved.
TEL: +886-2-2218-1066
FAX: +886-2-2218-1014
Website: www.oring-networking.com
E-mail: [email protected]
Configurations
After installing the switch and connecting cables, start the switch by turning on power.
The green power LED should turn on.
LED indication table
1. Launch the Internet Explorer and type in IP address of the switch. The default static IP address is
192.168.10.1
2. Log in with default user name and password (both are
). After logging in, you should see
the following screen. For more information on configurations, please refer to the user manual. For
information on operating the switch using ORing’s Open-Vision management utility, please go to
ORing website.
admin
LED
Color
Status
Description
Green
On
System power on
PWR
Green
Blinking
Upgrading firmware
R.M
Green
On
Ring Master
On
Ring enabled
Ring
Green
Blinking
Ring structure is broken
Fault
Amber
On
Errors (For port malfunctioning)
10/100/1000Base-T(X) RJ45 port
On
Port connected
Link/Act
Green
Blinking
Transmitting data
Green
On
Port is running at 1000Mbps
Amber
On
Port is running at 100Mbps
Speed
Green / Amber
Off
Port is running at 10Mbps
100/1000Base-X SFP port
On
Port connected
Link/Act
Green
Blinking
Transmitting data
RGS-92222GCP-NP-E
Fault contact
Relay
None
Relay output to carry capacity of 1A at 24VDC
100~240VAC with power socke, and dual 48VDC
(36 ~72VDC) power inputs at 6-pin terminal block
23 Watts
Reverse Polarity Protection on
DC input(s)
-
Present
4360g
441 (W) x 342 (D) x 44 (H) mm
(17 x 13.46 x 1.73 inches)
RGS-92222GCP-NP Series
RGS-92222GCP-NP Series
V+
V-
V-
V+
3A@24V
DC Power 48V
PW2
PW3
