RGS-7244GP(-E) User’s Manual
ORing Industrial Networking Corp
73
MAC Table Learning
If the learning mode for a given port is grayed out, another module is in control of the mode, so
that it cannot be changed by the user. An example of such a module is the MAC-Based
Authentication under 802.1X.
Each port can do learning based upon the following settings:
Label
Description
Auto
Learning is done automatically as soon as a frame with unknown
SMAC is received.
Disable
No learning is done.
Secure
Only static MAC entries are learned, all other frames are dropped.
Note: Make sure that the link used for managing the switch is
added to the Static Mac Table before changing to secure learning
mode, otherwise the management link is lost and can only be
restored by using another non-secure port or by connecting to the
switch via the serial interface.
Static MAC Table Configuration
The static entries in the MAC table are shown in this table. The static MAC table can contain 64
entries.
The maximum of 64 entries is for the whole stack, and not per switch.
The MAC table is sorted first by VLAN ID and then by MAC address.
Label
Description
Delete
Check to delete the entry. It will be deleted during the next save.
VLAN ID
The VLAN ID for the entry.
MAC Address
The MAC address for the entry.
Port Members
Checkmarks indicate which ports are members of the entry.
Check or uncheck as needed to modify the entry.
Adding a New Static
Entry
Click
to add a new entry to the
static MAC table. Specify the VLAN ID, MAC address, and port
members for the new entry. Click "Save".
格式化: 字型: 12 點, 粗體
格式化: 字型: 12 點, 粗體
刪除
:
