Q I G
Quick Installation Guide
PRINTED ON RECYCLED PAPER
Version 1.0
Q
uick
I
nstallation
G
uide
Configurations
After installing the switch and connecting cables, start the switch by
turning on power. The green power LED should turn on.
LED indication table
1. Launch the Internet Explorer and type in IP address of the switch. The
default static IP address is
192.168.10.1
Regulatory Approvals
FCC Part 15, CISPR (EN55022) class A
EMI
EN61000-4-2 (ESD)
EN61000-4-3 (RS)
EN61000-4-4 (EFT)
EN61000-4-5 (Surge)
EN61000-4-6 (CS)
EN61000-4-8
EN61000-4-11
EMS
Warranty
5 years
Warranty
5 years
M A N A G E D
Rack-Mount
GIGABIT
SWITCH
PoE
ORing Industrial Networking Corp.
Copyright© 2015 ORing
All rights reserved.
TEL: +886-2-2218-1066
FAX: +886-2-2218-1014
Website: www.oring-networking.com
E-mail: [email protected]
IEC60068-2-27
Shock
IEC60068-2-32
Free Fall
IEC60068-2-6
Vibration
2. Log in with default user name and password (both are
). After
logging in, you should see the following screen. For more information
on configurations, please refer to the user manual. For information on
operating the switch using ORing’s Open-Vision management utility, please
go to ORing website.
admin
Wiring
For power supply, simply insert the AC power cable to the power
connector at the back of the switch and turn on the power switch. The
input voltage
is 100~240V
/ 50~60Hz.
range
AC
Power inputs
Grounding and wire routing help limit the effects of noise due to
electromagnetic interference (EMI). Run the ground connection from the
ground screws to the grounding surface prior to connecting devices.
Grounding
Resetting
To reboot the switch, press the Reset button for 2-3 seconds.
To restore the switch configurations back to the factory defaults, press the Reset button for 5 seconds.
LED
Color
Status
Description
PWR
Green
On
System power is connected
R.M
Green
On
Device is operating as a ring master
On
Ring is enabled and device is running in Ring mode
Ring
Green
Blinking
Ring structure is broken
10/100/1000Base-T(X) RJ45 port
On
Port is linked
Link/Act
Green
Blinking
Transmitting data
Amber
On
Port is linked and runs at 10/100Mbps
Speed
Green
On
Port is linked and runs at 1000Mbps
PoE
Blue
On
Power is supplied over Ethernet cable
SFP port
On
Port is linked
Link/Act
Green
Blinking
Transmitting data
RGPS-9084GP-P
RGPS-9084GP-P
Managed Gigabit PoE Ethernet Switch
Specifications
ORing Switch Model
Physical Ports
Technology
Ethernet Standards
10/100/1000Base-T(X) with
P.S.E. Ports in RJ45 Auto
MDI/MDIX
Switch Properties
Security Features
Device Binding security feature
Enable/disable ports, MAC based port security
Port based network access control (802.1x)
VLAN (802.1Q) to segregate an secure network traffic
Radius centralized password management
SNMPv3 encrypted authentication and access security
Https / SSH enhance network security
RGPS-9084GP-P
8
-40~60 C : provided total 240watts maximum, 60 ~ 75 C : provided total 120watts maximum
o
o
IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX
IEEE 802.3z for 1000Base-X
IEEE 802.3ab for 1000Base-T
IEEE 802.3x for Flow control
IEEE 802.3ad for LACP (Link Aggregation Control Protocol )
IEEE 802.1p for COS (Class of Service)
IEEE 802.1Q for VLAN Tagging
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)
IEEE 802.1x for Authentication
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
IEEE 802.3af/at PoE specification
Switch latency: 7 us
Switch bandwidth: 24Gbps
Max. Number of Available VLANs: 256
IGMP multicast groups: 128 for each VLAN
Port rate limiting: User Define
MAC Table
8K
Processing
Store-and-Forward
Priority Queues
8
Jumbo frame
Up to 9.6K Bytes
100/1000Base-X SFP Port
4
Packet Buffer
4Mbits
Software Features
STP/RSTP/MSTP (IEEE 802.1D/w/s)
Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units
TOS/Diffserv supported
Quality of Service (802.1p) for real-time traffic
VLAN (802.1Q) with VLAN tagging
IGMP Snooping
IP-based bandwidth management
Application-based QoS management
DOS/DDOS auto prevention
Port configuration, status, statistics, monitoring, security
DHCP Server/Client
SMTP Client
Modbus TCP
DNS client proxy
NTP server
RS-232 Serial Console Port
Network Redundancy
O-Ring, Open-Ring, O-Chain, Fast Recovery, MRP, MSTP (RST/STP compatible)
RS-232 in RJ45 connector with console cable. 115200bps, 8, N, 1
(support backup unit DBU-01)
Power
Power consumption(Typ.)
17 Watts (PoE output not included)
Overload current protection
Present
Overload current protection
100~240VAC with power socket
Environmental
-40 to 85 C (-40 to 185 F)
o
o
Storage Temperature
Operating Temperature
Physical Characteristic
Dimension (W x D x H)
Weight (g)
3730g
5% to 95% Non-condensing
Operating Humidity
Enclosure
19 inches rack mountable
443.7 (W) x 230 (D) x 44 (H) mm (17.46 x 9.05 x 1.73 inches)
-40 to 75 C (-40 to 167 F)
o
o
Console Port Pin Definition
The device can be managed via console ports using the RJ-45 cable provided. You can
connect the port to a PC using an Console cable provided to perform management
