IPS-1042FX-24V
10/100TX
1
2
3
4
5
6
P1
P2 Fault
LINK/ACT
TX
RX
TX
RX
Practical Operation
Q I G
Quick Installation Guide
IPS-1042FX-24V Series
IPS-1042FX-24V Series
Version 1.0
Q
uick
I
nstallation
G
uide
ORing Industrial Networking Corp.
Features
IPS-1042FX-24V series
IPS-1042FX-24V series
IPS-1042FX-24V series
IPS-1042FX-24V series
are unmanaged PoE Ethernet switches with
4x10/100Base-T(X) P.S.E. and 2x100Base-FX ports.
supports Power over Ethernet, a system to transmit electrical power, along with
data, to remote devices over standard twisted-pair cable in an Ethernet network.
has 4x10/100Base-T(X) P.S.E.Power Sourcing
Equipment) ports.
P.S.E. is a device (switch or hub for instance) that will
provide power in a PoE setup.
support redundant
power inputs, configurable relay output alarm and rigid IP-30 housing.
In addition,
the wide operating temperature range from -40 to 70 C can satisfy most of
operating environment.
o
Introduction
Specifications
IPS-1042FX-24V series can be used in connecting several Ethernet devices like
Ethernet I/O, IP-Camera or other Ethernet switches.
In addition, there are two
r
power inputs at terminal block to avoid interruption caused by power
down.
When the primary DC power input fails, the backup power input will take over
immediately to guarantee a non-stop operation.
edundant
Industrial Unmanaged PoE Switch
I
PS-1042FX-24V series provide 4x10/100Base-T(X) PoE (P.S.E.) and 2x100Base-
FX single/multi-mode fiber ports
Supports IEEE 802.3at compliant PoE and total power budget is 120Watts with
maximum 30Watts per port
Support auto-negotiation and auto-MDI/MDI-X
Support store and forward transmission
Support flow control
Support surge protection technology
Warning system by relay output
Slim type rigid IP-30 housing design
DIN-Rail and wall mounting enabled
Power Connection Guide
Front Panel
A
1907-2-29-IPS1042FX-0
Connections of Ethernet devices
PRINTED ON RECYCLED PAPER
ORing Switch Model
Physical Ports
Technology
Ethernet Standards
LED Indicators
Green: Power LED x2
Power indicator
10/100 Base-T(X) Ports in RJ45
Auto MDI/MDIX with P.S.E.
IPS-1042FX-MM-SC-24V
4
IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX and 100Base-FX
IEEE 802.3x for Flow control
IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.)
MAC Table
2048 MAC addresses
Environmental
-40 to 85 C (-40 to 185 F)
o
o
Storage Temperature
Operating Temperature
5% to 95% Non-condensing
Operating Humidity
Regulatory Approvals
-40 to 70 C (-40 to 158 F)
o
o
Amber: Indicate PWR1 or PWR2 failure
Fault indicator
Fault Contact
Relay
Relay output to carry capacity of 1A at 24 VDC
Power
Redundant Input power
Power consumption(Typ.)
6.48 Watts
(power consumption of P.S.E. is not included)
Overload current protection
Reverse polarity protection
Present
Not Present
Physical Characteristic
Enclosure
IP-30
Dimension (W x D x H)
Weight (g)
395g
Dual DC inputs 24~36VDC on 6-pin terminal block
41.0 (W) x 94.9 (D) x 144.3 (H) mm (1.61 x 3.74 x 5.68 inches)
10/100Base-T(X)RJ45 Port
Indicator
Green for port Link/Act.
Green for PoE power injected.
Processing
Store-and-Forward
Fiber Ports Number
2
Green for port Link/Act.
100Base-FX Fiber Port Indicator
Fiber Link/Act LED
Green: PoE power injected
Green: Link/Act
Fiber Port
LAN Port
Power 1 LED
Power Fault LED
SWITCH
I N D U S T R I A L
PoE
Power 2 LED
2
Fiber Ports standard
100Base-FX
100Base-FX
Fiber Mode
Multi-mode
Single-mode
Fiber Diameter (µm)
62.5/125
m & 50/125
m
µ
µ
9/125
m
µ
Fiber Optical Connector
SC
SC
Typical Distance (Km)
2 Km
30 Km
Wavelength (nm)
1310 nm
1310 nm
Max. Output Optical Power (dbm)
-14 dbm
-8 dbm
Min. Output Optical Power (dbm)
-23.5 dbm
-15 dbm
Max. Input Optical Power (Saturation)
0 dbm
0 dbm
Min. Input Optical Power (Sensitivity)
-31 dbm
-34 dbm
Link Budget (db)
7.5 db
19 db
Fiber
P
orts
Specification
5.4 Watts
(power consumption of P.S.E. is not included)
FCC Part 15, CISPR (EN55022) class A
EMI
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge),
EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
EMS
IEC60068-2-27
Shock
IEC60068-2-32
IEC60068-2-6
Vibration
Free Fall
Warranty
5 years
EN60950-1
Safety
Frame Ground
G
Power
Supply
24-36VDC
V+
V-
Warning
Device
GND
+24V
V+
V-
DIP Switch Select for
Power Alarm Relay Output
Power
Supply
24-36 VDC
Power
Supply
DIP-2
OFF
OFF
ON
DIP-1
Power failure relay alarm disabled
PWR-1 failure,
alarm enabled
relay
PWR-2 failure,
alarm enabled
relay
DIP Switch Function
OFF
ON
OFF
Description
ON
PWR-1 or PWR-2 failure,
alarm enabled
relay
ON
PWR-1
PWR-2
V2- V2+
V1- V1+
1A@24V
Check Polarity First.
！
Warning
!!!
24-36Vdc Input only
IPS-1042FX-MM-SC-24V
