ORiNG IGS-3032GC Скачать руководство пользователя страница 70

Страница: 70 / 101

IGS-3032GC User’s Manual

Packet Collision

The number of times a collision detected by this port.

Clear

Clear all counters.

Help

Show help file.

5.1.12.4

Port Monitoring

Port monitoring supports TX (egress) only, RX (ingress) only, and TX/RX monitoring. TX

monitoring sends any data that egress out checked TX source ports to a selected TX

destination port as well. RX monitoring sends any data that ingress in checked RX source

ports out to a selected RX destination port as well as sending the frame where it normally

would have gone. Note that keep all source ports unchecked in order to disable port

monitoring.

Port monitoring interface

The following table describes the labels in this screen.

Label

Description

Destination Port

The port will receive a copied frame from source port for

monitoring purpose.

Source Port

The port will be monitored. Mark the blank of TX or RX to be

monitored.

The frames come into switch port.

The frames receive by switch port.

Apply

Click “

Apply

” to set the configurations.

Clear

Clear all marked blank.(disable the function)

Help

Show help file.

Содержание IGS-3032GC






































































































Результаты поиска

Содержание IGS-3032GC

Отзывы:

Похожие инструкции для IGS-3032GC

Бренды по названию

Популярные бренды

ORiNG IGS-3032GC, Руководство пользователя

Результаты поиска

Содержание IGS-3032GC

Отзывы:

Похожие инструкции для IGS-3032GC

Бренды по названию

Популярные бренды