IES-2042 Series User’s Manual
ORing Industrial Networking Corp.
38
5.1.7.5 Fault
Relay
Alarm
When any selected fault event is happened, the Fault LED in switch panel will light up and
the electric relay will signal at the same time.
Fault alarm interface
5.1.8 Save Configuration
If any configuration changed, “
Save Configuration
” should be clicked to save current
configuration data into the permanent flash memory. Otherwise, the current configuration
will be lost when power off or system reset.
System Configuration interface
The following table describes the labels in this screen.
Label
Description
Save
Save all configurations.
Help
Show help file.