Q I G
Quick Installation Guide
PRINTED ON RECYCLED PAPER
Q
uick
I
nstallation
G
uide
ORing Industrial Networking Corp.
Copyright© 2014 ORing
All rights reserved.
TEL: +886-2-2218-1066
FAX: +886-2-2218-1014
Website: www.oring-networking.com
E-mail: [email protected]
Q I G
Specifications
Power
Input power
48VDC from P.o.E port
Physical Characteristic
Enclosure
IP-67
Dimension (W x D x H)
162 (W) x 101.5 (D) x 58 (H) mm (6.38 x 4.0 x 2.28 inch.)
Weight (g)
Environmental
o
o
-30 to 85 C (-22 to 185 F)
Storage Temperature
5% to 95% Non-condensing
Operating Humidity
Regulatory Approvals
FCC Part 15, CISPR (EN55022) class A
EMI
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge),
EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
EMS
IEC60068-2-27
Shock
IEC60068-2-32
IEC60068-2-6
Vibration
Free Fall
Warranty
3 years
Frequency Band
Transmission Rate
Encryption Security
WEP: (64-bit, 128-bit key supported)
WPA/WPA2: (WEP and AES encryption) 802.11i
WPA-PSK (256-bit key pre-shared key supported)
802.1X Authentication supported
TKIP encryption
Wireless Security
SSID broadcast disable
Transmit Power
Receiver Senstivity
Protocol Support
Protocol
ARP,BOOTP, DHCP, DNS, HTTPs, IP, ICMP, SNTP, TCP, UDP, RADIUS, SNMP, STP (IEEE 802.1D)
EN60950-1
Safety
o
o
-20 to 70 C (-4 to 158 F)
Operating Temperature
ORing WLAN Access
Point Model
10/100 Base-T(X) Ports in RJ45
Auto MDI/MDIX
2
Physical Ports
Technology
Modulation
WLAN Interface
Operating Mode
AP/
/AP-Client
Client
/Bridge
Antenna and Connector
Radio Frequency Type
OFDM
IAP-W420+
IEEE802.11b/g/n: CCK, DQPSK, DBPSK
IEEE802.11g/n : OFDM with BPSK, QPSK, 16-QAM, 64-QAM
America / FCC : 2.412~2.462 GHz (11 channels )
Europe CE / ETSI : 2.412~2.472 GHz (13 channels )
-96dBi
±
2dBi
720g
IEEE802.11b: 11, 5.5, 2, 1 Mbps
IEEE 802.11g: 54, 48, 36, 24, 18, 12, 9, 6 Mbps
IEEE 802.11n: up to 300Mbps
IEEE802.11b/g/n: 800mw(29dbm) max.
Build-in 10dBi panel antenna
IAP-W422+
790g
1. Launch the Internet Explorer and type in IP address of the device. The default static
IP address is
192.168.10.2
Follow the steps below to log in and access the system:
2. Log in with default user name and password (both are admin).
After
logging
in,
you
should
see
the
following
screen.
For
more
information
on
configurations,
please
refer to the user manual. For information on operating the device
using
ORing’s Open-
Vision management utility, please go to ORing website.
Resetting
For protection, the reset button is placed
in
the
case
covered
by
a screw head. If you
need to reset the device, remove the screw and use a
very small point object like a needle
or a toothpick to poke the reset button.
To restore the device
configurations back to the
factory defaults, press the
Reset
button for 5 seconds.
Power Consumption(Typ.)
9 watts
Version 1.0
2 x External N-type antenna connector
IAP-W420+/W422+
Industrial IP-67 PoE Outdoor Access
Point
Wireless
ACCESS POINT
IP-67
PoE
IAP-W420+/W422+
LED
Color
Status
Description
PWR
Green
On
PoE power is on and power supply in normal function
On
Port is linked
ETH
Green
Blinking
Transmitting data
On
WLAN activated
(WLAN strength: 1<30%, 2<60%, 3<90%)
WLAN
Green
Blinking
Transmitting data via WLAN