Orima ORC-81, Инструкция по эксплуатации

Страница: 52 / 134

EN - 15
All values in the table were determined in accordance with the EN 61121:2013 standard.
Consumption values may vary from the values in the table depending on the fabric type,
spin speed, environment conditions and voltage values.
5.2.1.
Auxiliary Functions
The table that summarises the options that can be selected in programmes is given below.
Option Description
Anti-Crease
If you select the "Anti-Crease" option and do not open the door of the dryer at the
end of the programme, the 1-hour anti-crease phase will extend to 2 hours. After
selecting the Anti Crease option, you will hear an audible warning. You can press
the same button again to cancel the option. If you open the door or press the Start/
Pause key while the anti-crease step is in progress, the said step will be cancelled.
Delay Start
You can delay the start time of the programme by selecting the 3-hour, 6-hour or
9-hour option. You can activate the desired delay time by pressing the Start/Pause
button. When the time is up, the selected programme will start automatically.
During the delay time, options compatible with the programme can be activated/
deactivated.
Buzzer Cancel
The dryer gives an audible warning when program selection knob is turned,
buttons are pressed and at the end of programme. To cancel these warnings,
press and hold the “Anti Crease Option” button for 3 seconds. When you press the
button, you will hear an audible warning that the option has been cancelled.
Child Lock
There is a child lock option to avoid changes in the programme low when keys
are pressed during the programme. To activate the child lock, press and hold
the “Delay start” and “Anti Crease” keys simultaneously for 3 seconds. When
the child lock is active, all keys will be deactivated. Child lock will be deactivated
automatically at the end of the programme. When activating/deactivating the
child lock, the LED of the ‘‘Delay start” and “Anti Crease” options will lash and
an audible warning will be heard. Warning: when the product is running or the
child lock is active, if you turn the programme selection knob, you will hear an
audible warning. Even if you set the programme knob to another programme, the
previous programme will continue running. To select a new programme, you need
to deactivate the child lock and then set the programme selection knob to “Of”
position. Then, you can select and start the desired programme.