ORIGO SF-028, Инструкция по эксплуатации, Страница: 4 / 10

Assembly
॥৻Ӽး
1. Front Guard/ ߻ᆛ
2. Blade Cap/ ယᙹ
3. Blade/
৻ယ
4. Guard Cap/ ᆛᙹ
5. Rear Guard/ ࡕᆛ
6. Main Body/ Ьᐒᡏ
7. Outer Pole/ Ѧࢊ
8. Base Connector/
ۭ০ೱௗᏔ
9. Base/ ۭ০
10. Wire Cover/ ႝጕᇂ
11. Connected Sockets and Plugs/ ௗೱක০Ϸකᓐ
12. Power Cord/
ႝྍጕ
13. Base Cap/ ۭ০ᙹ
14. Remote/ ᇿ௓Ꮤ
15. Screw/ ᖥํ
16. Remote Storage Place/ ᇿ௓ᏔӸܫೀ
ڗр೽ҹ (7~11) ǴڕΠႝጕᇂ (10) Ǵ٠ஒۭ০ೱௗᏔ
(8) ܫΕۭ০ (9) ޑ༝ϾύǴฅࡕᡣۭ০ೱௗᏔකᓐऀ
ၸႝጕϾᆶۭ০ක০ (11) ೱௗǴख़ཥӼးႝጕᇂ (10)
٠٬Ҕۭ০ᙹ (13) ஒЍࢊᙹᆙǶ
Pick out the parts (7~11), uninstall the wire cover
(10) and put the base connector (8) inside hole of
the base (9), then let the base connector's plug
pass through wire hole to connect with sockets
(11), reinstall the wire cover (10) and fasten it
with the base cap (13).
வႝᐒືڗрယᙹ
(2)
Ϸᆛᙹ
(4)
Ǵ٬Ҕᆛᙹ
(4)
עࡕ
ᆛ (5) ᙹᆙӧႝᐒѦෘ߻य़Ǵ٠٬Ҕယᙹ (2) ע৻ယ (3)
ᙹᆙӧႝᐒືǶ
Remove the blade cap (2) and guard cap (4) from
the motor shaft. Fixing the rear guard (5) onto
the front of motor housing by the guard cap (4)
and fixing the blade (3) on the motor shaft by the
blade cap (2).
ע߻ᆛ (1) ܫӧࡕᆛ (5) ΢Ǵ٠٬ҔᆛԌԌᆙǴӆ٬Ҕ
ᖥํ
(15)
עᆛԌᙹӳǶ
Put the front guard (1) onto the rear guard (5),
fixing it with the guard clip, and then fasten the
guard clip with the screw (15).
1 2 3 4 5 6
15
7
9
8
16
!!!!ඵૈޔࢬ॥৻
AI DC Stand Fan
12
13
M
14
Speed Key/
॥ೲᗖ
On/Off Key/ ໒ᜢᗖ
OSC Key/
Ѱѓଌ॥ᗖ
11
10
ʚ
30
120
90
60
A