LoRaWAN indoor gateway_OG857_User manual_V1.0.0
- 10 -
screws will be drilled.
Step 2 :Drill hales in the wall and plug in plastic extension pipes, then place the gateway bracket
onto the marked location with holes aligned.
Step3:Tighten the screw.
Place gateway into bracket
Step1: Connect 4G /LoRa/WIFI antennas
Step2: Connect power adapter, put the SIM card into the slot, or connect the Ethernet cable. when
gateway is powered on , check the LED status, make sure gateway is working normally.
Step3: Attach gateway to bracket, make the hook in the gateway align to the bracket grooves, push
the gateway upward (in a direction shown with a blue arrow) and look it to the bracket.
NOTES:
l
The gateway should be handled gently without violent collisions and drops.
l
The gateway should be mounted on a flat and dry surface with little dust and good ventilation.
Do not expose the gateway to rain, water leakage and any humidity.