Clothes Dryer
with UV Sterilization
: CD-1231UV
: 220-240V~, 50/60Hz
: 900W
Model
Voltage
Power
Maintance and Care
1) Unplug the power cord before cleaning.
2) Do not immerse the Dryer in water, it may cause electric
shocks.
3) Clean the Dryer with a soft cloth. To remove presistent dirt,
wipe down with a cloth that has been dampened with warm
soapy water.
Warranty
This product is guaranteed for 1 year (commercial use for 3
months)from the date of receipt against manufacturing defect.
The warranty does not cover the inner pots and other
accessories, damage or defect caused by negligence or use not
according to this instruction manual.
Paper weight: 120 gram or above
Printing Color: Black
1) Plug the power cord into a 220-240V~ electrical outlet.
2. Turn the control knob clockwise, the Dryer switch on and the
power indicator light will be on.
3. Turn the control knob to set desired auto power off time.
- The range of the timer is from 0 to 180 minutes.
- When the control knob pointed at "UV" position, UV tube will
light on and process 5 minutes sterilization.
4) To turn the Dryer off, rotate the control knob to "OFF" position.
5) Turn the control knob anti-clockwise to "ON" position for
drying without time limit.
Remark: For repair service, please contact and bring alone the
invoice or receipt to the Service Centre.
***Extra 3 months warranty: just complete Online Warranty
Registration within 10 days from the date of receipt, free
warranty will be extended to 15 months (not applicable to
commercial use). Please enter our website: www.origo.hk
Caution
1) Read all instructions carefully before using the Clothes Dryer.
Appropriately keep it for furture reference when necessary.
2) Before using the Dryer, check if the volatage marked on
the rating label corresponds to the mains in your home.
3) This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not
play with the appliance.
4) Only the provided power cord can be used.
5) Remove all the package before using the Dryer.
6) The Dryer is not intended for use in wet or damp locations.
7) Place the Dryer on a stable surface and keep away from heat
source.
8) Do not use the Dryer in outdoor location.
9) The Dryer is designed for domestic use only.
10) Do not switch on the UV light when the dryer is working as
a heater.
11) Ensure spin-drying completely before using the Dryer.
12) To avoid being scalded, never touch the metal parts on the
wind outlet during drying process.
13) This Dryer is intended only for drying textiles washed in
water.
14) Check the clothing care label before drying, Make sure they
can be dried using the drying machine, pay special attention
to its temperature limits.
15) Keep a distance of at least 150mm between Dryer and the
wall.
16) Clothes to be dried should be able to endure 75 degree
above, and maximum weight is 5 kgs.
17)
Always check the Dryer, if the power cord is damaged, it must
be replaced and repaired by authorized service agent.
Operation
Main Parts
STORAGE: Store the Electric Thermal Pot with these instructions
in the original box in a cool and dry place.
Cover
Upper
Supporting
Tube
Lower
Supporting
Tube
Water Proof
Plate
Control Knob
Power Cord
& Plug
Clothes Rack
Standing Feet
Connector
Wind Outlet
Indicator
Wind Inlet
Copper Post
Power
Installation
1) Insert the standing feet into
correspond holes at the
bottom of main body.
2) Fit the water-proof plate onto
the lower supporting tube,
then screw down (clockwise)
the lower supporting tube into
the hole of wind outlet.
3) Screw down (clockwise)
the upper supporting tube
into the hole of connector.
4) Push the clothes rack of the
upper supporting tube upward
unit it exceed position of the
copper post.
5) Hang the wet clothes onto the
rack, then put the cover and
close with the zipper.
6) To use the dryer as a heater,
please follow installation step
"1".
Service Centre
ORIGIN MARKRTING LIMITED
Unit H,21/F, Reason Group Tower
(nearby 12 Wah Sing Street), 403 Castle Peak Road,
Kwai Chung, N.T., Hong Kong.
Tel: 2156 8238
Office Hours
10:30am - 12:30pm (Mon ~ Fri)
02:30pm - 05:30pm (Mon ~ Fri)
10:30am - 12:30pm (Sat)
(Closed on Sunday and Holiday
Origin Map
