Operations
使用方法
4
健康氣炸烤爐
Heathly Air Fryer
氣炸烤爐可使用控制面板按鍵操控。
出風口隔牆板
Air Outlet
Partition
Wall Board
1.
取出所有包裝物料。
2.
用熱水，一些溫和清潔液和非研磨性海綿徹底清潔炸籃和其他配件。
3.
用濕布擦拭氣炸烤爐的內部和外部。
注意
:
這是一種可在熱空氣上工作的空氣炸爐，請勿在爐中注油或炸油脂。
4.
將氣炸烤爐擺放於穩固的平面上。
5.
把出風口隔牆板橫向放於出風口下方，使用兩枚螺絲將出風口隔牆板鎖
緊於氣炸烤爐。
6.
打開玻璃門，將盛油盤放在氣炸烤爐內的下方。
7.
將食材放在所需烹飪配件裡，然後將所需烹飪配件正確放入氣炸烤爐內。
注意
:
本氣炸烤爐帶有內置安全開關，只有將所需烹飪配件推進到正確的位置，
才能將氣炸烤爐切換到待機模式。
8.
將插頭插入交流電壓
220-240V~50/60Hz
的獨立插座，氣炸烤爐已可使用。
The Air Fryer may be operated by the control panel.
1. Remove all packaging material.
2. Thoroughly clean the frying basket and other accessories with hot water,
mild cleaner and a non-abrasive sponge.
3. Wipe the inside and outside of the Air Fryer with a moist cloth.
Notice: This is an Air Fryer that works on hot air. Do not fill the Fryer with
oil or frying fat.
4. Place the Air Fryer on a stable and flat surface.
5. Place the air outlet partition wall board horizontally below the air outlet,
and use two screws to lock the air outlet partition wall board to the Air Fryer.
6. Place the grease tray at the bottom of the Air Fryer.
7. Put the ingredients in the required cooking accessories, and then put the
required cooking accessories into the Air Fryer.
Note: The appliance with built-in safety switch, only the cooking
component propulsion in correct place, it can be switched to
standby mode.
8. Plug the power plug into an 220-240V~ 50/60Hz electrical outlet, The
Air Fryer is ready for use.
