6
Step 2; See Figure 2:
Install Right Foot (1), Left Foot (2) and Front Panel Frame (4).
A.
Pull the floormats back from the front corners of the step plate. Place the Right Foot
on the step plate as shown.
B.
Insert a ¼” x ¾” bolt down through the holes. Add a nylock nut,
do not tighten at
this time.
C.
Repeat these steps on the left side with Left Foot.
D.
Place the Front Panel Frame over the hood.
Use a ¼” x 5/8” bolt and a nylock nut
to fasten the left side to the hole in Figure 2D.
Tighten enough to hold upright.
Figure 2
Figure 2D- Left Side
(2) LH
Foot
(1) RH
Foot
Figure 2A
