Conical Rise & Fall
Pendant Light
E26
A
BALL
LAMP GUIDANCE
TYPE*
WATTAGE**
BASE
SHAPE
INCANDESCENT
CFL
ECO-HALOGEN
LED
120V ac 60Hz
Hanging Instructions
IP20
* Warm white (2700k) low energy lamps recommended.
** Wattage value provided as a guide to suitable lamps. Lower wattage than stated may be used.
US-FP297
Conical Rise & Fall
The Conical Rise and Fall is a traditionally inspired light with a modern twist. Rise & fall pendants
allow you to adjust height and vary lighting effects, making them the ideal choice for dining tables
and kitchens. Simply lower the light for intimate dinners or raise for a broader pool of general light.
The light features Original BTC’s signature braided cotton flex.
100W MAX
20W
n/a
18W
Refer to diagrams on opposite page.
STEP 1
- Determine the maximum drop (the lowest the shade will hang from the ceiling) and total movement (rise and
fall) of the shade required (see fig.1). Remember: the larger the maximum drop, the larger the minimum drop
(the highest the shade will hang without the weight hitting the shade) and vice versa.
- The drop can be controlled by shortening or lengthening the amount of flex (D) that is allowed to pass though
the cord grip (E) (see fig.2). Once you are happy with drop, allow 6” from cord grip (E) in order to make
electrical connection, then remove excess flex using wire cutters.
STEP 2
- Make electrical connection- see point 6 on the reverse.
STEP 3
Screw ceiling plate to ceiling box with washers (G) in place (see fig. 3),
taking care not to apply excessive
force
when screwing in screws as this can damage the china ceiling rose.
DO NOT USE POWER TOOLS.
To adjust drop of shade (see fig.4), gently pull the shade (J) downwards (while also holding the flex above the
shade) to increase the drop and push gently upwards (taking care not to hit the weight (I) as it falls) to
decrease the drop.
Contents
Installation Diagram
- Junction box
- 3 x UL wire nuts
- Screwdriver
Contents
Tools/Hardware Required
1
2
3
4
Ceiling rose
Weight
Shade
2 x washers
1
4
Fig.1
Fig.2
Fig.3
Fig.4
B
F
E
I
J
Junction box*
Main supply*
Wire nuts*
Luminaire cable
Cord Restraint
Ceiling Rose
A
B
C
D
E
F
G
H
I
Washer
Junction box screws*
Weight
J Shade
*not supplied
2
3
D
A
C
D
E
F
G
B
H
Max.
Drop
Min.
Drop
Increase Drop
Decrease Drop
THIS PRODUCT IS MADE FROM FINE BONE CHINA. EXCESSIVE FORCE USED
DURING INSTALLATION OR OPERATION CAN CAUSE DAMAGES OR BREAKAGES.
PLEASE READ THE INSTRUCTIONS ON THE REVERSE BEFORE YOU BEGIN INSTALLING YOUR LIGHT
!
!
