Teacup
Table Light
FT168N
Teacup Table Light, White
230V ac 50Hz
Adjusting Shade
IP20
Safety Instructions
Cleaning and Maintenance
These instructions are provided for your safety in order to prevent the risk of Fire, Electric shock or
Injury. Please retain for future reference. When fitting is in operation, some parts will become hot;
take care when using/handling.
- Ensure the lamp type and max wattage is followed- do not exceed. Take care not to overtighten
lamp.
- Do not touch the lamp (bulb) or lamp holder while in operation, as both become very hot.
- Turn off and unplug fitting, leaving lamp to cool before changing lamp. Dispose of old lamps
carefully.
- Adjust light fitting only when power to the fitting is off and has been left to cool.
- Never leave a fitting without a lamp in position.
- Keep light fitting away from combustible materials such as soft furnishings.
- Ensure children do not play with the light fitting.
- Ensure the light is positioned on a solid, level and non-slip surface and make sure the position of
the cable does not pose a trip hazard.
- If the electrical flex or electrical components become damaged at any point, the fitting must be
unplugged from the power supply immediately and not operated until the damaged parts are
fixed/replaced.
- For use in a dry, indoor environment only. Ensure the fitting does not come into contact with any
liquids.
Metal finishes should only be cleaned with a soft, dry cloth. Do not use polishes or abrasives. Bone
china can be cleaned using a soft damp cloth with a mild detergent if necessary. Switch off power to
the fitting before cleaning. Spare parts are available for this product, please see contact details on
the reverse.
1 Clamp ring
2 Clamp handle
3 Stem
1
2
3
- With one hand supporting the shade, gently loosen the clamp handle (2). One quarter-turn, in an anti-clockwise
direction should be sufficient.
- The shade can then be moved into desired position, ensuring the clamp remains attached to the stem, but
without applying excessive force to the washers on the inside of the clamp. Ensure the shade is still supported
whilst adjusting position.
- Secure in place by gently tightening clamp handle,
taking care NOT to overtighten
, as this can damage the
clamp.
- Do not adjust the position of the shade without loosening the clamp first, as this will damage the washers.
BALL
E14
LAMP GUIDANCE
TYPE
WATTAGE*
BASE
SHAPE
INCANDESCENT
CFL
ECO-HALOGEN
LED
* Warm white (2700k) low energy lamps recommended.
** Wattage value provided as a guide to suitable lamps. Lower wattage than stated may be used.
CANDLE
n/a
9W
n/a
7W
