Oxford Double
Table & Floor Light
US-FT620/BR - Oxford Double table light
US-FF630/BR - Oxford Double floor light
120V ac 60Hz IP20
Assembly
A
A
C
G
H
B
D
E
F
C
D
B
G
E
F
F
H
ensure metal
brackets are aligned
Fig 1
GU10
PAR16
LAMP GUIDANCE
TYPE*
WATTAGE**
BASE
SHAPE
HALOGEN
LED
n/a
10W
* Use LED lamps only. Warm white (2700k) recommended.
** Wattage value provided as a guide to suitable lamps. Lower wattage than stated may be used.
- With the bulb installed, place the first 47mm washer (F) on top of the shoulders shade carrier at the top of the lamp base.
- Place the cyclindrical shade on top of this.
- Place the second large washer (F) on top of the shade hole, and then place the spacer (E) on top of this, aligning the 3 legs
with the legs of the shade holder underneath (see fig 1.)
- Put the small 20mm washer (D) over the threaded tube, onto the spacer.
- Place the conical shade (C) onto this, place the brass disc (B) on top (logo up) and fix in place with the finial (A).
Do not overtighten
Contents
Contents
A
B
C
D
E
F
G
H
Finial
Disc
Conical shade
20mm Rubber washer
Spacer
47mm washer (x2)
Cylindrical shade
Lamp base
