6
D E E P ™ CO L L E CT I O N I N STA L L AT I O N US E R M A N UA L
CONTROLS AND INDICATORS
Power Light –
This blue light will be on in when the Deep
TM
subwoofer is powered on. The
light will be off when the Deep
TM
subwoofer is either off or in standby mode.
Line In -
The line level connection is used to connect the Deep
TM
subwoofer to your
pre-amp/AV receiver. Use an RCA cable (not included) to connect your AV Receiver with a
single Deep
TM
Subwoofer/LFE output to the LFE IN of the Deep
TM
subwoofer or connect the full
range outputs of your receiver or amp. Note, that are using L/R RCA inputs will require the
use of crossover in the Deep
TM
subwoofers.
Reset -
The reset button allows you to revert to the original default settings. To reset, press
and hold the button for approximately 5 seconds until the light flashes, then let go.
All settings within the phone app will be returned to the factory parameters.
Service -
This connection is used for servicing the Deep
TM
subwoofer and is not used for
normal operation.
AC Power Connection -
This connection is a standard IEC power jack. Use the supplied
power cord to connect the Deep
TM
subwoofer to an available AC outlet.
