recommended to countersink the holes using the countersink bit,
this prevents the gelcoat from cracking.
Step 6
IMPORTANT: When the BOAT DECK is less than 1cm thick we
strongly advise to reinforce the mounting bracket with wood or
fiberglass cloth which is at least 1cm thick.
The reinforcement should be as big as possible. This prevents stress
on the boat which causes the gelcoat to crack. WARRANTY DOES
NOT COVER: Any cracks or other damage to the gelcoat or boat
because of mounting the tower. Snug the bolt but do not fully tighten
at this point.
Step 7
Install the bottom bars with the MOUNT SET. All feet are swivel and
can work with various mounting angles. Be sure to mount the
bottom bar vertical. When you fail to mount the bottom bar vertically,
you will not be able to fold the tower. Snug the bolt but do not fully
tighten at this point. Remove the Bottom bars and Tighten the 4
Mounting Brackets. Reinstall the bottom bar on the Mounting
Brackets and tighten the bolts.
Step 8
Firstly connect the 4 front bars to 1 left and 1 right, then assemble
one front bar on the Mounting Bracket. Snug the bolt but do not fully
tighten at this point. Slide the taped bar into the Top Cross bar.
Beware for scratches. Keep in mind that the tow point need to be
facing towards the back of the boat. Slide the second front bar into
Содержание Catapult
Страница 7: ......
