Motorised Power Brush
Pg. 5
Servicing
Make sure this vacuum cleaner is serviced regularly. Frequency of service depends on use, however carbon
brushes must be checked the first time within 300 hours of use. Clean out or replace internal foam insulation
and replace cloth filter bag every 300 hours unless you are using paper bags inside the cloth bag. Replace
damaged cable with a 7.5 Amp 2 core cable.
This unit may be fitted with a 240V receptacle for a motorised power floor brush. Most power
-
heads can
be adapted to this receptacle. See your supplier to ensure that the proper plug and hose fittings are used.
Motorised Power Brush Battery Powered
PB3800
A Commercial Battery powered brush that enhances the performance of any vacuum
cleaner. No cables to tangle or damage and can attach to any model vacuum
cleaner. Available from your Origin Dealer.
Disposable Sealed Filter Bags
18
Fitting HEPA Filter
-
see drawing 18
A.
Remove lid and sealed maxi
-
flow bag.
B.
Remove cloth filter bag , filter disc and bag stand.
C.
Remove / replace HEPA filter. When replacing filter make sure the gasket side is in contact with
the canister base.
D.
Only use the approved Origin HEPA filter.
E.
Replace the bag stand by inserting the three lugs into the upright posts on the canister base.
F.
Insert the filter disc and then the cloth filter bag.
G.
Fit the sealed maxi
-
flow disposable bag as in drawing 19.
H.
Secure the lid so that the maxi
-
flow bag is inside the clothe filter bag.
Fitting the Maxi
-
flow disposable bag
-
see drawing 19
A. Remove the lid and fit the sealed maxi
-
flow disposable bag as in drawing 19.
B.
Make sure the cloth filter bag is in place.
C.
Push on the maxi
-
flow bag securely.
D.
Secure the lid so that the maxi
-
flow bag is inside the clothe filter bag.
E.
After removing a used maxi
-
flow bag from the lid be careful not to raise dust, close the plastic flap
(see Fig. 20) on this bag to prevent dust escaping. Then dispose the maxi
-
flow bag responsibly.
19
20
