PageBot for Kindle 2 User Guide
Origin Instruments Corporation
P a g e |
10
PageBot DIP Switch Settings
PageBot integrates a compact four-position DIP Switch for setting user options. DIP Switch settings can be
readily changed using one end of an extended paper clip. The factory default settings are all DIP Switches UP
to support the following configuration:
Two switch mode
- one switch for Next Page and one switch for Previous Page
Keep Awake mode
– this keeps the Kindle from going to sleep by automatically performing a Next
Page, Previous Page combination every nine (9) minutes.
Enable USB Host
– this enables the optional use of buttons on a USB mouse or USB wireless mouse
for paging.
Switch 1
Switch 2
Operation
ON
ON
Two switch mode: One switch for Next Page, One switch for Previous Page
OFF
ON
Single switch mode: Brief tap for Next Page, Hold 1.0 second for Previous Page
ON
OFF
Single switch mode: Brief tap for Next Page, Hold 1.4 seconds for Previous Page
OFF
OFF
Single switch mode: Brief tap for Next Page, Hold 2.0 seconds for Previous Page
Switch 3
Operation
ON
Enable Keep Awake mode. PageBot will automatically initiate a Next Page, Previous Page combination
every 9 minutes to keep Kindle from going to sleep.
OFF
Disable Keep Awake mode
Switch 4
Operation
ON
Enable USB Host. This enables the optional use of a USB mouse or USB wireless mouse.
OFF
Disable USB Host. (Note: This setting can save power if PageBot is operating from an auxiliary USB
battery pack.)
DIP Switches
– “UP” position is ON
