2
3
844·674·4461
WWW.ORIGINACOUSTICS.COM
SUBA150 INSTALLATION MANUAL
Getting Started
1. Audio sensing setting
2. Red = Amplifier is in auto mode
Green = Amplifier sensing signal: amplifier is on
3. Set with an SPL meter. See page 5
4. Set based on your application. See page 4
5. RCA input from a processor LFE
6. Set based on your input level and power rating of your load
7. High level input. 100 WRMS limit from receiver output
8. Amplified output to your subwoofer or your tactile
9. YOU MUST SET TO YOUR LOCAL POWER GRID LEVEL. NORMALLY
SHIPPED @ 110VAC
SubA150
110-120V~
220-240V~
1
2
3
4
5
6
7
8
9
Specifications
Frequency Response 28Hz 175Hz
Power Line Voltage
110-120C~60Hz / 180 WATTS
Dimensions (HxWxD) 2” X 9” X 9”
Weight
4.5 Lbs
Finish
Black
Input Sensitivity For
Full Output
240mVrms from left input with volume
control at 0dB, 90mVrms with volume control
fully clockwise.
Input Impedance
8.2 kilo-Ohm Line-level inputs, 32-Ohm
Speaker-level inputs
Internal System Gain 42dB from left input jack to speaker with
the Bass Level control at 0dB , 54dB with the
control fully clockwise.
Output Power into 4 ohm load 280 WRMS
Output Power into 8 ohm load 140 WRMS
WARNING
PLEASE READ THIS MANUAL BEFORE ATTEMPTING INSTALLATION
