6
844·674·4461
3) Cutting the Hole (Retrofit Installation)
Cutout Hole size: 210mm (8¼”)
When you’ve decided on the
locations for all of the speak-
ers, use the template to trace
a circle lightly in pencil where
the hole should be. (If you
don’t have a template, check
the Specifications section for
cutout sizes.) If you’re unsure
on whether there may be ob-
stacles (such as pipes or wires)
where you plan on installing
the speaker, drill a ⅛ inch hole
in the center of the circle, then
put a bent coat hanger through
the hole to feel around. Use a
keyhole or drywall saw to cut
the hole.
4) Connecting the Wires
Insert the wires into the con-
nectors, making sure that the
positive wire is being attached
to the red connection and the
negative wire is being attached
to the black connection. If the
negative and positive wires are
switched, speaker performance
will be drastically impacted.
If these speakers are being
installed during home construc-
tion, the installation process
will be a bit different (although
much simpler). For these situa-
tions it’s recommended you pur-
chase an Origin Acoustics BR68
bracket (for the Director 6/8 col-
lection), though the BRP6 (for
the Producer 6 collection) will
also work. Bracket installation
instructions are provided with
the bracket, or can be found on
our website (www.originacous-
tics.com).
For New Construction
